Toyota Yaris: Theft Deterrent / Keyless Entry / Smart Key System (for Entry Function)
ComponentsCOMPONENTS ILLUSTRATION
*1 SECURITY HORN ASSEMBLY - -
N*m (kgf*cm, ft.*lbf): Specified torque - - InspectionINSPECTION PROCEDURE 1...
PRECAUTION CAUTION REGARDING INTERFERENCE WITH ELECTRONIC DEVICES CAUTION: As weak radio waves are emitted from the electrical key transmitter sub-assembly, if a pacemaker is being used, be sure to read the pacemaker instruction manual and the following...
Other information:
INSPECTION PROCEDURE 1. INSPECT SPIRAL CABLE SUB-ASSEMBLY NOTICE:
Do not remove the steering sensor from the spiral cable sub-assembly when inspecting the spiral cable sub-assembly.
Remove the steering sensor from the spiral cable sub-assembly only when replacing the spiral cable sub-assembly...
INSPECTION PROCEDURE 1. INSPECT FRONT DOOR WITH MOTOR LOCK ASSEMBLY RH (a) Check the resistance of the lock and unlock switch. (1) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Condition Specified Condition K11-6(L) - K11-8(E) Lock Below 1 Ω K11-6(L) - K11-8(E) Neutral 10 kΩ or higher K11-5(UL) - K11-8(E) Unlock Below 1 Ω K11-5(UL) - K11-8(E) Neutral 10 kΩ or higher If the result is not as specified, replace the front door with motor lock assembly RH...
Categories
WARNING
Never allow a person to ride in the luggage compartment/trunk
Allowing a person to ride in the luggage compartment/trunk is
dangerous.
The person in the luggage compartment/trunk could be seriously injured or
killed during sudden braking or a collision.
Do not drive with the liftgate/trunk lid open
read more