Toyota Yaris: Power Source & Network

Vacuum Sensor Assembly

ComponentsCOMPONENTS ILLUSTRATION *1 VACUUM SENSOR GROMMET *2 VACUUM SENSOR ASSEMBLY ● Non-reusable part - - On-vehicle InspectionON-VEHICLE INSPECTION PROCEDURE 1...

G16e-gts (battery / Charging)

..

Other information:

Toyota Yaris XP210 (2020-2026) Reapir and Service Manual: Crankshaft Position Sensor "A" Signal Compare Failure (P033562)

DESCRIPTION The crankshaft position sensor sends an engine speed signal (NE signal) to the ECM. The engine speed signal is then sent directly from the NEO terminal of the ECM to the engine stop and start ECU. Additionally, the ECM sends the engine speed to the engine stop and start ECU via CAN communication...

Toyota Yaris XP210 (2020-2026) Reapir and Service Manual: Relay

On-vehicle InspectionON-VEHICLE INSPECTION PROCEDURE 1. INSPECT WINDSHIELD WIPER RELAY (a) Check the operation of the windshield wiper relay. (1) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Condition Specified Condition 3 - 5 Auxiliary battery voltage not applied between terminals 1 and 2 10 kΩ or higher Auxiliary battery voltage applied between terminals 1 and 2 Below 1 Ω If the result is not as specified, replace the windshield wiper relay...