Toyota Yaris: Door / Hatch / Hood

Fuel Lid Lock Control Cable Assembly

ComponentsCOMPONENTS ILLUSTRATION *1 FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY *2 FUEL FILLER OPENING LID LOCK RETAINER *3 FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY - - RemovalREMOVAL PROCEDURE 1...

Components

C..

Other information:

Toyota Yaris XP210 (2020-2026) Reapir and Service Manual: Reassembly

REASSEMBLY PROCEDURE 1. TEMPORARILY TIGHTEN FRONT DISC BRAKE BLEEDER PLUG (a) Temporarily tighten the front disc brake bleeder plug to the front disc brake cylinder. HINT: Fully tighten the front disc brake bleeder plug after bleeding the system. 2. INSTALL FRONT DISC BRAKE BLEEDER PLUG CAP (a) Install the front disc brake bleeder plug cap to the front disc brake bleeder plug...

Toyota Yaris XP210 (2020-2026) Reapir and Service Manual: Removal

REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the knock sensor removal/installation are shown below. Necessary Procedure After Parts Removed/Installed/Replaced Replacement Part or Procedure Necessary Procedure Effect/Inoperative when not Performed Link Replacement of throttle body with motor assembly Cleaning the deposits from the throttle body with motor assembly Air leaks from intake system Replacement of knock control sensor Inspection after repair Poor idle, etc...