Toyota Yaris: Maintenance and Care / Owner Maintenance
Maintenance Monitor
Select the icon on the home
screen to display the “Applications” screen.
Select “Maintenance” to display the maintenance list screen...
The owner or a qualified service technician should make these vehicle
inspections at the indicated intervals to ensure safe and dependable
operation...
Other information:
TERMINALS OF ECU COMBINATION METER ASSEMBLY
(a) Measure the voltage and resistance and check for pulses according to the value(s) in the table below. Terminal No. (Symbol) Terminal Description Condition Specified Condition H6-1 (B) - Body ground Auxiliary battery Ignition switch off 11 to 14 V H6-9 (CANH) CAN communication line - - H6-10 (MSCL) Local bus communication line - - H6-11 (TX1-) - Body ground Outside temperature sensor signal - - H6-13 (FR2) - H6-24 (FE&B) Fuel level signal Ignition switch ON, fuel level full → low (fuel level warning light on) Pulse generation (See waveform 3) H6-14 (FV) - Body ground Fuel sender gauge (Power source) Ignition switch ON Pulse generation (See waveform 1) H6-15 (MSTI) - Body ground Steering pad switch signal Ignition switch ON, up, down, right and left switches on steering pad switch not pushed 4...
ComponentsCOMPONENTS ILLUSTRATION
*1 PCV VALVE (VENTILATION VALVE SUB-ASSEMBLY) - - On-vehicle InspectionON-VEHICLE INSPECTION PROCEDURE 1. INSPECT PCV VALVE (VENTILATION VALVE SUB-ASSEMBLY) (a) Check the PCV valve (ventilation valve sub-assembly) operation...
Categories
WARNING
When removing the fuel-filler cap, loosen the cap slightly and wait
for
any hissing to stop, then remove it
Fuel spray is dangerous. Fuel can burn skin and eyes and cause illness
if
ingested. Fuel spray is released when there is pressure in the fuel tank and
the fuel-filler cap is removed too quickly.
read more