Toyota Yaris: Owner Maintenance / Owner Maintenance Precautions

Toyota Yaris XP210 (2020-2025) Owner's Manual / Maintenance and Care / Owner Maintenance / Owner Maintenance Precautions

The owner or a qualified service technician should make these vehicle inspections at the indicated intervals to ensure safe and dependable operation.

Bring any problem to the attention of your Toyota dealer or qualified service technician as soon as possible.

When Refueling

  • Brake and clutch fluid level
  • Engine coolant level
  • Engine oil level
  • Washer fluid level

At Least Monthly

  • Tire inflation pressures

At Least Twice a Year (For Example, Every Spring and Fall)

You can do the following scheduled maintenance items if you have some mechanical ability and a few basic tools and if you closely follow the directions in this manual.

  • Engine coolant
  • Engine oil

Improper or incomplete service may result in problems. This section gives instructions only for items that are easy to perform.

As explained in the Introduction, several procedures can be done only by a qualified service technician with special tools.

Improper owner maintenance during the warranty period may affect warranty coverage. Refer to Introduction for owner’s responsibility in protecting your investment. For details, read the separate Toyota Warranty and Maintenance Guide provided with the vehicle. If you are unsure about any servicing or maintenance procedure, have it done by your Toyota dealer.

There are strict environmental laws regarding the disposal of waste oil and fluids. Please dispose of your waste properly and with due regard to the environment.

We recommend that you entrust the oil and fluid changes of your vehicle to your Toyota dealer.

WARNING

Do not perform maintenance work if you lack sufficient knowledge and experience or the proper tools and equipment to do the work. Have maintenance work done by a qualified technician

Performing maintenance work on a vehicle is dangerous if not done properly. You can be seriously injured while performing some maintenance procedures.

If you must run the engine while working under the hood, make certain that you remove all jewelry (especially rings, bracelets, watches, and necklaces) and all neckties, scarves, and similar loose clothing before getting near the engine or cooling fan which may turn on unexpectedly

Working under the hood with the engine running is dangerous. It becomes even more dangerous when you wear jewelry, loose clothing or have long hair or a long beard. Either can become entangled in moving parts and result in injury.

Toyota Yaris. Owner Maintenance Precautions Switch the ignition to off and make sure the fan is not running before attempting to work near the cooling fan

Working near the cooling fan when it is running is dangerous. The fan could continue running indefinitely even if the engine has stopped and the engine compartment temperature is high. You could be hit by the fan and seriously injured.

Do not leave items in the engine compartment

After you have finished checking or doing servicing in the engine compartment, do not forget and leave items such as tools or rags in the engine compartment.

Tools or other items left in the engine compartment could cause engine damage or a fire leading to an unexpected accident.

    Owner Maintenance

    ..

    Hood

    With the vehicle parked, pull the release handle to unlock the hood. Insert your hand into the hood opening, slide the latch lever to the right, and lift up the hood...

    Other information:

    Toyota Yaris XP210 (2020-2025) Reapir and Service Manual: Installation


    INSTALLATION PROCEDURE 1. INSTALL AUTO HIGH BEAM SWITCH (a) Engage the claws to install the auto high beam switch as shown in the illustration. 2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY Click here 3. CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY Click here 4...

    Toyota Yaris XP210 (2020-2025) Reapir and Service Manual: Lost Communication with ECM/PCM "A" Missing Message (U010087,U012687,U012987)


    DESCRIPTION The AWD ECU assembly receives signals from the ECM, steering sensor and skid control ECU (brake actuator assembly) via CAN communication. DTC No. Detection Item DTC Detection Condition Trouble Area Warning Indicate Memory U010087 Lost Communication with ECM/PCM "A" Missing Message When the ignition switch is ON, the IG1 terminal voltage is 10 V or more and the vehicle speed is 60 km/h (37 mph) or more, signals cannot be received from the ECM for 1 second or more CAN communication system AWD ECU assembly ECM Displayed Yes U012687 Lost Communication with Steering Angle Sensor Module Missing Message When the following continues: When the IG1 terminal voltage is 10 V or more, communication with the steering sensor is impossible for 1 second or more When the IG1 terminal voltage is 10 V or more, a condition in which communication with the steering sensor is impossible occurs 1 time or more within a 5-second period, and this occurs 10 times within 60 seconds CAN communication system AWD ECU assembly Steering sensor Displayed Yes U012987 Lost Communication with Brake System Control Module Missing Message When the IG1 terminal voltage is 10 V or more, communication with the skid control ECU (brake actuator assembly) is impossible for 3 seconds or more CAN communication system AWD ECU assembly Skid control ECU (Brake actuator assembly) Displayed Yes PROCEDURE 1...

    Categories

    Fuel Gauge

    The fuel gauge shows approximately how much fuel is remaining in the tank when the ignition is switched ON. We recommend keeping the tank over 1/4 full.

    Toyota Yaris. Fuel Gauge

    Full 1/4 Full Empty

    read more

     
    Copyright © 2025 www.toyaris4.com