Toyota Yaris: Door / Hatch / Front Door
ComponentsCOMPONENTS ILLUSTRATION
*1 BACK DOOR WEATHERSTRIP - - ● Non-reusable part - - RemovalREMOVAL PROCEDURE 1. REMOVE BACK DOOR WEATHERSTRIP (a) Remove the back door weatherstrip...
COMPONENTS ILLUSTRATION
*A for Front Passenger Side *B for Driver Side *C w/ Interior Illumination - - *1 FRONT DOOR LOWER FRAME BRACKET GARNISH *2 MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT ARMREST BASE UPPER PANEL *3 POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT ARMREST BASE UPPER PANEL *4 FRONT DOOR TRIM GARNISH *5 FRONT DOOR TRIM BOARD SUB-ASSEMBLY *6 FRONT DOOR INSIDE HANDLE SUB-ASSEMBLY *7 FRONT DOOR INSIDE HANDLE BEZEL PLUG *8 FRONT DOOR GLASS INNER WEATHERSTRIP *9 NO...
Other information:
DESCRIPTION Refer to DTC P036511. Click here
DTC No. Detection Item DTC Detection Condition Trouble Area MIL Note P036500 Camshaft Position Sensor "B" Bank 1 No Signal (sub) No camshaft position sensor (for exhaust camshaft) signal to the sub ECM while engine running ECM Comes on SAE: P0365 MONITOR DESCRIPTION While the engine is running, when the EV1 (EV2) signal is not input to the sub CPU even though the EV1 (EV2) signal is input to the main CPU, the ECM judges that a malfunction has occurred in an internal ECM circuit, and illuminates the MIL and stores a DTC...
INSPECTION PROCEDURE 1. INSPECT OCCUPANT DETECTION SENSOR (SEPARATE TYPE FRONT SEAT CUSHION PAD) (a) Check the resistance. (1) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Condition Specified Condition
If the result is not as specified, replace the occupant detection sensor (separate type front seat cushion pad)...
Categories
Before refueling, close all the doors, windows, and the liftgate/trunk
lid, and switch the ignition OFF.
To open the fuel-filler lid, pull
the remote fuel-filler lid release.

To remove the fuel-filler cap, turn it counterclockwise.
Attach the removed cap to the
inner side of the fuel-filler lid.
read more