Toyota Yaris: Steering Column / Steering Wheel

Steering System

PrecautionPRECAUTION HANDLING PRECAUTIONS FOR STEERING SYSTEM (a) Care must be taken when replacing parts. Incorrect replacement may affect the performance of the steering system and result in a driving hazard...

Components

COMPONENTS ILLUSTRATION *1 NO. 1 STEERING WHEEL ORNAMENT *2 STEERING PAD SWITCH ASSEMBLY *3 STEERING WHEEL ASSEMBLY - - Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping" : N*m (kgf*cm, ft...

Other information:

Toyota Yaris XP210 (2020-2026) Reapir and Service Manual: Problem Symptoms Table

PROBLEM SYMPTOMS TABLE Stop and Start System Symptom Suspected Area Link Stop and start system does not operate Refer to "Stop and Start System does not Operate" Refer to "Stop and Start System does not Operate (Battery Condition)" Restarting after a short period of time from an idling stop Refer to "Restarting after a Short Period of Time from an Idling Stop" After engine stops due to stop and start system, engine does not restart Refer to "After Engine Stops due to Stop and Start System, Engine does not Restart" Failure to restart from IG-ON engine stall Refer to "Failure to Restart from IG-ON Engine Stall" Stop and start cancel indicator does not operate Combination meter assembly Indicator circuit (CAN communication system) Engine stop and start ECU Stop and start indicator does not operate Combination meter assembly Indicator circuit (CAN communication system) Engine stop and start ECU Stop and start control cannot be canceled ECAN terminal voltage Stop and start cancel switch circuit Multi-information display screen does not change after pressing steering pad switch assembly...

Toyota Yaris XP210 (2020-2026) Reapir and Service Manual: Starter Circuit Stuck On (P16449E)

DESCRIPTION The engine stop and start ECU detects abnormalities in the DI (+B) value that is input from the integrated IC (stop and start backup boost converter integrated IC) to the CPU. If a logical inconsistency occurs between the +B value and DI (+B) value input to the CPU, the engine stop and start ECU stores DTC P16449E and blinks the stop and start cancel indicator...