Toyota Yaris: Rear Suspension / Rear Coil Spring
COMPONENTS ILLUSTRATION
*1 REAR COIL SPRING *2 REAR LOWER COIL SPRING INSULATOR *3 REAR UPPER COIL SPRING INSULATOR *4 REAR NO. 2 SUSPENSION ARM ASSEMBLY *5 REAR SUSPENSION TOE ADJUST CAM SUB-ASSEMBLY *6 NO...
Other information:
REMOVAL PROCEDURE 1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Click here
2. REMOVE CLUTCH START SWITCH ASSEMBLY Click here
3. REMOVE CLUTCH MASTER CYLINDER PUSH ROD CLEVIS WITH HOLE PIN (a) Remove the clip from the clevis pin.
(b) Remove the master cylinder push rod clevis with hole pin to disconnect the clutch master cylinder assembly from the clutch pedal sub-assembly...
REPLACEMENT PROCEDURE 1. REPLACE RING PIN NOTICE: It is not necessary to remove the ring pins unless they are being replaced. (a) Remove the 10 ring pins. (b) Using a plastic hammer, install 10 new ring pins.
*a 14 mm (0.551 in.) *b 12 mm (0...
Categories
The front seat belt pretensioners are designed to deploy in moderate or
severe frontal, near frontal collisions.
In addition, the pretensioners operate when a side collision or a rollover
accident is detected. The pretensioners operate differently
depending on what types of air bags are equipped. For more details
about the seat belt pretensioner operation, refer to the SRS Air Bag
Deployment Criteria.
read more