Toyota Yaris: Vehicle Interior / Lighting (int)
INSTALLATION PROCEDURE 1. INSTALL ROOF HEADLINING (a) Tilt the roof headlining diagonally and insert it into the cabin through the passenger side door as shown in the illustration...
ComponentsCOMPONENTS ILLUSTRATION
*A for Driver Side *B for Front Passenger Side *1 MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT ARMREST BASE UPPER PANEL *2 POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT ARMREST BASE UPPER PANEL *3 NO...
Other information:
SYSTEM DESCRIPTION OUTLINE OF THEFT DETERRENT SYSTEM
The theft deterrent system can be set by locking the doors using any of the following operations:
Entry lock operation
Wireless lock operation
Key linked lock operation
By opening and closing the doors
In the armed state, the alarm function will be activated if one of the following conditions is met:
Any of the doors are unlocked...
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during the front door belt moulding removal/installation are shown below...
Categories
WARNING
Never allow a person to ride in the luggage compartment/trunk
Allowing a person to ride in the luggage compartment/trunk is
dangerous.
The person in the luggage compartment/trunk could be seriously injured or
killed during sudden braking or a collision.
Do not drive with the liftgate/trunk lid open
read more