Toyota Yaris: G16e-gts (fuel) / Fuel Injector (for Port Injection)
INSTALLATION CAUTION / NOTICE / HINT NOTICE: This procedure includes the installation of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts...
COMPONENTS ILLUSTRATION
*1 PORT FUEL INJECTOR ASSEMBLY *2 NO. 5 ENGINE WIRE *3 INJECTOR VIBRATION INSULATOR *4 FUEL DELIVERY SPACER *5 FUEL DELIVERY PIPE *6 FUEL DELIVERY GUARD *7 OIL LEVEL GAUGE GUIDE *8 OIL LEVEL GAUGE SUB-ASSEMBLY *9 NO...
Other information:
COMPONENTS ILLUSTRATION
*1 REAR BUMPER SIDE SEAL RH *2 REAR BUMPER SIDE SEAL LH *3 REAR BUMPER ASSEMBLY - - ILLUSTRATION
*1 BACK-UP LIGHT ASSEMBLY *2 NO. 2 LUGGAGE ROOM WIRE ILLUSTRATION
*1 REAR BUMPER CENTER GUARD *2 REFLEX REFLECTOR ASSEMBLY LH *3 REFLEX REFLECTOR ASSEMBLY RH *4 NO...
REMOVAL PROCEDURE 1. REMOVE PIN HOLD CLIP (a) Apply protective tape around the front bumper assembly. HINT: Use the same procedure for the RH side and LH side.
Protective Tape (b) Using a screwdriver with its tip wrapped in protective tape, disengage the claws to remove the 2 pin hold clips...
Categories
The front seat belt pretensioners are designed to deploy in moderate or
severe frontal, near frontal collisions.
In addition, the pretensioners operate when a side collision or a rollover
accident is detected. The pretensioners operate differently
depending on what types of air bags are equipped. For more details
about the seat belt pretensioner operation, refer to the SRS Air Bag
Deployment Criteria.
read more