Toyota Yaris: Power Mirror Control System / Data List / Active Test

Toyota Yaris XP210 (2020-2024) Reapir and Service Manual / Vehicle Exterior / Mirror (ext) / Power Mirror Control System / Data List / Active Test

DATA LIST / ACTIVE TEST

DATA LIST

NOTICE:

In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

HINT:

Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

(a) Read the Data List according to the display on the GTS.

NOTICE:

Depending on the vehicle specifications, some of the Data List items in the following table will not be displayed on the GTS.

Body Electrical > Main Body > Data List

Tester Display

Measurement Item

Range

Normal Condition

Diagnostic Note

Outer Mirror Fold Switch

Outer mirror switch signal

OFF or ON

OFF: Outer mirror switch not in retract position

ON: Outer mirror switch in retract position

-

Outer Mirror Auto Switch

Outer mirror switch signal

OFF or ON

OFF: Outer mirror switch not in auto position

ON: Outer mirror switch in auto position

-

Mirror Fold Signal

Mirror fold request signal

OFF or ON

OFF: Outer mirror switch not in retract position

ON: Outer mirror switch in retract position

-

Mirror Return Signal

Mirror return request signal

OFF or ON

OFF: Outer mirror switch not in return position

ON: Outer mirror switch in return position

-

Body Electrical > Power Distribution Box > Data List

Tester Display

Measurement Item

Range

Normal Condition

Diagnostic Note

Mirror Heater Input Signal

Mirror heater drive signal (Input)

OFF or ON

OFF: Ignition switch ON, rear defogger switch off

ON: Ignition switch ON, rear defogger switch on

-

Mirror Heater Output Signal

Mirror heater drive signal (Output)

OFF or ON

OFF: Ignition switch ON, rear defogger switch off

ON: Ignition switch ON, rear defogger switch on

-

Mirror Heater Output Current

Mirror heater output current

Min.: 0 A, Max.: 255.0 A

Mirror heater operating: 2.8 to 3.4 A

-

Mirror Heater Fuse Shut Off Status

Mirror heater output current shut off status

OFF or ON

OFF: Normal state

ON: Current shut off state

-

Mirror Heater Fuse Shut Off Count

Mirror heater output current shut off count

Min.: 0, Max.: 255

0

-

Power Retract Mirror Input Signal

Power retract mirror drive signal (Input)

Stop, Retract, Return

Stop: Not operate the outer mirror switch

Retract: Outer mirror switch in retract position

Return: Outer mirror switch in return position

-

Power Retract Mirror Output Signal

Power retract mirror drive signal (Output)

Stop, Retract, Return

Stop: Outer rear view mirror assembly not move

Retract: Outer rear view mirror assembly moves to the retracted position

Return: Outer rear view mirror assembly moves to the return position

-

Power Retract Mirror Output Current

Power retract mirror output current

Min.: 0 A, Max.: 255.0 A

Power retract mirror operating: 1.6 to 2.0 A

-

Power Retract Mirror Fuse Shut Off Status

Power retract mirror output current shut off status

OFF or ON

OFF: Normal state

ON: Current shut off state

-

Power Retract Mirror Fuse Shut Off Count

Power retract mirror output current shut off count

Min.: 0, Max.: 255

0

-

ACTIVE TEST

HINT:

Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

(a) Perform the Active Test according to the display on the GTS.

NOTICE:

Depending on the vehicle specifications, some of the Active Test items in the following table will not be displayed on the GTS.

Body Electrical > Air Conditioner > Active Test

Tester Display

Measurement Item

Control Range

Diagnostic Note

Rear Defogger Relay

Mirror Heater

OFF or ON

-

Body Electrical > Main Body > Active Test

Tester Display

Measurement Item

Control Range

Diagnostic Note

Mirror Fold Signal

Retract mirror operation

OFF or ON

-

Mirror Return Signal

Retract mirror operation

OFF or ON

-

    Terminals Of Ecu

    TERMINALS OF ECU CHECK MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) AND POWER DISTRIBUTION BOX ASSEMBLY *1 Power Distribution Box Assembly *2 Main Body ECU (Multiplex Network Body ECU) (a) Remove the main body ECU (multiplex network body ECU) from the power distribution box assembly...

    Mirror Heater does not Operate with Rear Defogger Switch

    DESCRIPTION When the mirror heater switch (rear window defogger switch) is operated, the RR DEF relay drive request signal is sent to the air conditioning amplifier assembly and then to main body ECU (multiplex network body ECU) via CAN communication...

    Other information:

    Toyota Yaris XP210 (2020-2024) Reapir and Service Manual: Replacement


    REPLACEMENT PROCEDURE 1. REPLACE RING PIN NOTICE: It is not necessary to remove the ring pins unless they are being replaced. (a) Remove the 10 ring pins. (b) Using a plastic hammer, install 10 new ring pins. *a 14 mm (0.551 in.) *b 12 mm (0...

    Toyota Yaris XP210 (2020-2024) Reapir and Service Manual: Charging Control System (P160F00)


    DESCRIPTION If the engine stop and start ECU receives a charging control malfunction signal from the ECM, it will blink the stop and start cancel indicator and store DTC P160F00. DTC No. Detection Item DTC Detection Condition Trouble Area Warning Indicate Memory Note P160F00 Charging Control System All of the following conditions are met for 15 seconds or more (1 trip detection logic): Charging control malfunction signal received from the ECM...

    Categories

    Fuel-Filler Lid and Cap

    WARNING

    When removing the fuel-filler cap, loosen the cap slightly and wait for any hissing to stop, then remove it

    Fuel spray is dangerous. Fuel can burn skin and eyes and cause illness if ingested. Fuel spray is released when there is pressure in the fuel tank and the fuel-filler cap is removed too quickly.

    read more

     
    Copyright © 2024 www.toyaris4.com