Toyota Yaris: Bluetooth® Hands-Free / Call Interrupt
A call can be interrupted to receive an incoming call from a third party.
When
is selected or the pick-up
button on the steering
wheel is pressed, the current call is held and the system switches to
the new incoming call.
When
is selected, the current
call is ended and the system
switches to the new incoming call (GSM network only).
When
is selected or the hang-up
button on the steering wheel
is pressed, an incoming call is refused.
- The function may not be available depending on the contractual content
of
the mobile device.
- The function may not be operable depending on the type of the telephone
network and the mobile device.
When an incoming call is received, the incoming call notification
screen is displayed. The “Incoming Call Notifications” setting must be
on. Refer to Communication Settings...
SMS (Short Message Service) messages, and E-mail received by
connected devices can be downloaded, displayed, and played (read
by the system).
Additionally, replies can also be made to calls and messages in the
received messages...
Other information:
TERMINALS OF ECU CHECK POWER DISTRIBUTION BOX ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)
*1 Power Distribution Box Assembly *2 Main Body ECU (Multiplex Network Body ECU) (a) Remove the main body ECU (multiplex network body ECU) from the power distribution box assembly...
COMPONENTS ILLUSTRATION
*1 FRONT BUMPER ASSEMBLY *2 PIN HOLD CLIP ILLUSTRATION
*A w/ Pre-collision System - - *1 NO. 3 ENGINE ROOM WIRE *2 MILLIMETER WAVE RADAR SENSOR ASSEMBLY
N*m (kgf*cm, ft.*lbf): Specified torque - - ILLUSTRATION
*1 FOG LIGHT COVER LH *2 FOG LIGHT COVER RH *3 FOG LIGHT ASSEMBLY LH *4 FOG LIGHT ASSEMBLY RH *5 FRONT BUMPER HOLE COVER *6 HOOD TO FRONT END PANEL SEAL *7 LOWER RADIATOR GRILLE SUB-ASSEMBLY *8 RADIATOR GRILLE SIDE MOULDING LH *9 RADIATOR GRILLE SIDE MOULDING RH *10 RADIATOR GRILLE EMBLEM ASSEMBLY *11 FRONT BUMPER EXTENSION MOUNTING BRACKET - - ILLUSTRATION
*1 FRONT BUMPER ENERGY ABSORBER *2 FRONT BUMPER SIDE RETAINER RH *3 RADIATOR UPPER AIR GUIDE PLATE *4 HEADLIGHT ASSEMBLY RH *5 HEADLIGHT ASSEMBLY LH *6 FRONT BUMPER SIDE RETAINER LH *7 FRONT BUMPER REINFORCEMENT *8 THERMISTOR ASSEMBLY *9 COOL AIR INTAKE DUCT - -
N*m (kgf*cm, ft...
Categories
The front seat belt pretensioners are designed to deploy in moderate or
severe frontal, near frontal collisions.
In addition, the pretensioners operate when a side collision or a rollover
accident is detected. The pretensioners operate differently
depending on what types of air bags are equipped. For more details
about the seat belt pretensioner operation, refer to the SRS Air Bag
Deployment Criteria.
read more