Toyota Yaris: Engine & Hybrid System / Stop And Start
Parts LocationPARTS LOCATION ILLUSTRATION
*1 STARTER ASSEMBLY *2 ECM *3 NO. 1 ENGINE ROOM RELAY BLOCK AND JUNCTION BLOCK ASSEMBLY - ST NO...
Other information:
ON-VEHICLE INSPECTION PROCEDURE 1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY Click here
2. DISCONNECT UNION TO CONNECTOR TUBE HOSE Click here
3. OPERATION CHECK (a) Connect the hose of the vacuum gauge to the vacuum pump assembly.
*a Vacuum Gauge *b Plug (b) Start the engine and warm it up for more than 2 minutes...
DISASSEMBLY PROCEDURE 1. REMOVE BACK-UP LIGHT ASSEMBLY Click here
2. REMOVE NO. 2 LUGGAGE ROOM WIRE (a) Disengage the clamps to remove the No. 2 luggage room wire.
3. REMOVE REFLEX REFLECTOR ASSEMBLY LH (a) Remove the screw.
(b) Disengage the claw and guide to remove the reflex reflector assembly LH...
#эвакуатор срочно#
Categories
WARNING
Never allow a person to ride in the luggage compartment/trunk
Allowing a person to ride in the luggage compartment/trunk is
dangerous.
The person in the luggage compartment/trunk could be seriously injured or
killed during sudden braking or a collision.
Do not drive with the liftgate/trunk lid open
read more