Toyota Yaris: Climate Control System / Fully Automatic Type

Toyota Yaris XP210 (2020-2025) Owner's Manual / Interior Features / Climate Control System / Fully Automatic Type

Type A

Toyota Yaris. Fully Automatic Type

Type B

Toyota Yaris. Fully Automatic Type

  1. Temperature control dial
  2. Fan control dial
  3. Mode selector dial
  4. Rear window defogger switch
  5. Air intake selector switch
  6. A/C switch

Dehumidifying

Operate the air conditioner in cool or cold weather to help defog the windshield and side windows. Set the mode selector dial to the desired position...

Control Switches

Temperature control dial This dial controls temperature. Turn it clockwise for hot and counterclockwise for cold. Fan control dial The fan has seven speeds...

Other information:

Toyota Yaris XP210 (2020-2025) Reapir and Service Manual: Turn Signal/Hazard Flasher Circuit Current Above Threshold (B150819)


DESCRIPTION This DTC is stored when the combination meter assembly detects a short in a turn signal light circuit. HINT: If there is a short in a turn signal light circuit, all of the turn signal lights in that circuit will not blink. DTC No. Detection Item DTC Detection Condition Trouble Area B150819 Turn Signal/Hazard Flasher Circuit Current Above Threshold Diagnosis Condition: Auxiliary battery voltage is 10 V or more Malfunction Status: Short in turn signal light circuit Headlight assembly Headlight unit assembly LH Headlight unit assembly RH Wire Harness LH Wire Harness RH Outer rear view mirror assembly Side turn signal light assembly LH Side turn signal light assembly RH Rear combination light assembly Rear turn signal light LED Harness or connector Combination meter assembly WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE: When replacing the combination meter assembly, always replace it with a new one...

Toyota Yaris XP210 (2020-2025) Reapir and Service Manual: Removal


REMOVAL PROCEDURE 1. SEPARATE ENGINE WIRE (a) Remove the bolt and engine wire. 2. REMOVE IGNITION COIL ASSEMBLY (a) Disconnect the ignition coil assembly connector. (b) Remove the bolt and ignition coil assembly. 3. REMOVE CAMSHAFT POSITION SENSOR (for Intake Side) (a) Disconnect the camshaft position sensor connector...

Categories

Turning the Engine Off

Stop the vehicle completely. Manual transaxle: Shift into neutral and set the parking brake.

Automatic transaxle: Shift the selector lever to the P position and set the parking brake.

Press the push button start to turn off the engine. The ignition position is off.

read more

 
Copyright © 2025 www.toyaris4.com