Toyota Yaris: Fully Automatic Type / Windshield Defrosting and Defogging

Toyota Yaris XP210 (2020-2023) Owner's Manual / Interior Features / Climate Control System / Fully Automatic Type / Windshield Defrosting and Defogging

Set the mode selector dial to the Toyota Yaris. Windshield Defrosting and Defogging position and turn the fan control dial to the desired speed.

In this position, the outside air position is automatically selected, and when the fan control dial is ON, the air conditioner automatically turns on. The air conditioner will directly dehumidify the air to the front windshield and side windows. Airflow amount will be increased.

Use the temperature control dial to increase the air flow temperature and defog the windshield more quickly.

WARNING

Set the temperature control to the hot or warm position when defogging ( position):

Using the position with the temperature control set to the cold position is dangerous as it will cause the outside of the windshield to fog up. Your vision will be hampered, which could lead to a serious accident.

Operation of Automatic Air Conditioner

Set the mode selector dial to the AUTO position. Set the air intake selector to the outside air position (indicator light turned off). Set the fan control dial to the AUTO position...

Sunlight/Temperature Sensor

Sunlight sensorDo not place objects on the sunlight sensor. Otherwise, the interior temperature may not adjust correctly. Interior temperature sensor Do not cover the interior temperature sensor...

Other information:

Toyota Yaris XP210 (2020-2023) Owner's Manual: Foot Brake

This vehicle has power-assisted brakes that adjust automatically through normal use. Should power-assist fail, you can stop by applying greater force than normal to the brake pedal. But the distance required to stop will be greater than usual. WARNING Do not coast with the engine stalled or turned off, find a safe place to stop Coasting with the engine stalled or turned off is dangerous...

Toyota Yaris XP210 (2020-2023) Reapir and Service Manual: Stop Lamp Relay Actuator Stuck On (C13807E)

DESCRIPTION When any of the following conditions are met, the skid control ECU (brake actuator assembly) sets the drive output (STPO) ON which operates the stop light switch assembly and turns on the stop lights. Illumination Conditions: Pre-collision brake is operating...