Toyota Yaris: Heating / Air Conditioning / Solar Sensor
ComponentsCOMPONENTS ILLUSTRATION
*1 NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY *2 COOLER THERMISTOR (ROOM TEMPERATURE SENSOR) *3 ASPIRATOR - - RemovalREMOVAL PROCEDURE 1...
Other information:
MONITOR DESCRIPTION The ECM monitors the input signals of the No. 1 accelerator pedal position sensor. If the input signals and control signals deviate, this DTC is stored. DTC No. Detection Item DTC Detection Condition Trouble Area MIL Note P060D49 Internal Control Module Accelerator Pedal Position Performance Internal Electronic Failure Either of the following conditions is met (1 trip detection logic):
There is an ECM main CPU error...
DISASSEMBLY CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during cylinder block removal/installation are shown below...
Categories
Stop the vehicle completely.
Manual transaxle:
Shift into neutral and set the parking brake.
Automatic transaxle:
Shift the selector lever to the P position and set the parking brake.
Press the push button start to turn off the engine. The ignition position is
off.
read more