Toyota Yaris: Meter / Gauge System / Lost Communication With ECM/PCM "A" Missing Message (U010087,U011487,U012987,U013187,U014087,U015187,U016887,U023587,U023A87,U111287,U113387)

Toyota Yaris XP210 (2020-2025) Reapir and Service Manual / Vehicle Interior / Meter / Gauge / Display / Meter / Gauge System / Lost Communication With ECM/PCM "A" Missing Message (U010087,U011487,U012987,U013187,U014087,U015187,U016887,U023587,U023A87,U111287,U113387)

DESCRIPTION

The combination meter assembly communicates with each ECU via CAN communication.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

U010087

Lost Communication With ECM/PCM "A" Missing Message

Diagnosis Condition:

  • The ignition switch is ON
  • IG power source voltage is 9.5 V or more

Malfunction Status:

  • No communication with ECM

Malfunction Time:

  • 3.6 seconds or more
  • ECM
  • CAN communication system
  • Combination meter assembly

U011487

Lost Communication with Four-Wheel Drive Clutch Control Module Missing Message

Diagnosis Condition:

  • The ignition switch is ON
  • IG power source voltage is 9.5 V or more

Malfunction Status:

  • No communication with 4WD ECU assembly

Malfunction Time:

  • 5.0 seconds or more
  • 4WD ECU assembly
  • CAN communication system
  • Combination meter assembly

U012987

Lost Communication with Brake System Control Module Missing Message

Diagnosis Condition:

  • The ignition switch is ON
  • IG power source voltage is 9.5 V or more

Malfunction Status:

  • No communication with skid control ECU (brake actuator assembly)

Malfunction Time:

  • 1.0 seconds or more
  • Skid control ECU (brake actuator assembly)
  • CAN communication system
  • Combination meter assembly

U013187

Lost Communication with Power Steering Control Module Missing Message

Diagnosis Condition:

  • The ignition switch is ON
  • IG power source voltage is 9.5 V or more

Malfunction Status:

  • No communication with power steering ECU with motor assembly

Malfunction Time:

  • 3.6 seconds or more
  • Power steering ECU with motor assembly
  • CAN communication system
  • Combination meter assembly

U014087

Lost Communication with Body Control Module Missing Message

Diagnosis Condition:

  • The ignition switch is ON
  • IG power source voltage is 9.5 V or more

Malfunction Status:

  • No communication with main body ECU (multiplex network body ECU)

Malfunction Time:

  • 5.0 seconds or more
  • Main body ECU (Multiplex network body ECU)
  • CAN communication system
  • Combination meter assembly

U015187

Lost Communication with Restraints Control Module Missing Message

Diagnosis Condition:

  • The ignition switch is ON
  • IG power source voltage is 9.5 V or more

Malfunction Status:

  • No communication with airbag sensor assembly

Malfunction Time:

  • 5.0 seconds or more
  • Airbag sensor assembly
  • CAN communication system
  • Combination meter assembly

U016887

Lost Communication with Vehicle Security Control Module Missing Message

Diagnosis Condition:

  • The ignition switch is ON
  • IG power source voltage is 9.5 V or more

Malfunction Status:

  • No communication with certification ECU (smart key ECU assembly)

Malfunction Time:

  • 5.0 seconds or more
  • Certification ECU (Smart key ECU assembly)
  • CAN communication system
  • Combination meter assembly

U023587

Lost Communication with Cruise Control Front Distance Range Sensor Missing Message

Diagnosis Condition:

  • The ignition switch is ON
  • IG power source voltage is 9.5 V or more

Malfunction Status:

  • No communication with millimeter wave radar sensor assembly

Malfunction Time:

  • 5.0 seconds or more
  • Millimeter wave radar sensor assembly
  • CAN communication system
  • Combination meter assembly

U023A87

Lost Communication with Image Processing Module "A" Missing Message

Diagnosis Condition:

  • The ignition switch is ON
  • IG power source voltage is 9.5 V or more

Malfunction Status:

  • No communication with forward recognition camera

Malfunction Time:

  • 5.0 seconds or more
  • Forward recognition camera
  • CAN communication system
  • Combination meter assembly

U111287

Lost Communication with Combination Switch Module Missing Message

Diagnosis Condition:

  • The ignition switch is ON
  • IG power source voltage is 9.5 V or more

Malfunction Status:

  • No communication with steering sensor

Malfunction Time:

  • 10.0 seconds or more
  • Steering sensor
  • CAN communication system
  • Combination meter assembly

U113387

Lost Communication with PMN Module Missing Message

Diagnosis Condition:

  • The ignition switch is ON
  • IG power source voltage is 9.5 V or more

Malfunction Status:

  • No communication with certification ECU (smart key ECU assembly)

Malfunction Time:

  • 3.6 seconds or more
  • Certification ECU (Smart key ECU assembly)
  • CAN communication system
  • Combination meter assembly

PROCEDURE

1.

CHECK FOR DTC (METER / GAUGE SYSTEM)

(a) Check for meter / gauge system DTCs.

Body Electrical > Combination Meter > Trouble Codes

Result

Proceed to

U010087, U011487, U012987, U013187, U014087, U015187, U016387, U023587, U023A87, U111287 or U113387 is output

A

DTCs are not output

B

None of the above conditions are met

C

A

GO TO CAN COMMUNICATION SYSTEM

B

USE SIMULATION METHOD TO CHECK

C

GO TO DIAGNOSTIC TROUBLE CODE CHART

    Turn Signal/Hazard Flasher Circuit Current Above Threshold (B150819)

    DESCRIPTION This DTC is stored when the combination meter assembly detects a short in a turn signal light circuit. HINT: If there is a short in a turn signal light circuit, all of the turn signal lights in that circuit will not blink...

    Entire Combination Meter does not Operate

    DESCRIPTION This circuit is the power source circuit for the combination meter assembly. This circuit provides two types of power sources; one is a constant power source, and the other is an IG power source...

    Other information:

    Toyota Yaris XP210 (2020-2025) Reapir and Service Manual: Adjustment


    ADJUSTMENT PROCEDURE 1. SECURE VEHICLE (a) Fully apply the parking brake and chock a wheel. CAUTION: Make sure to apply the parking brake and chock a wheel before performing this procedure. If the vehicle is not secure and the shift lever is moved to neutral, the vehicle may suddenly move, possibly resulting in an accident or serious injury...

    Toyota Yaris XP210 (2020-2025) Reapir and Service Manual: Crankshaft Position Sensor "A" No Signal (sub) (P033500)


    DESCRIPTION Refer to DTC P033511. Click here DTC No. Detection Item DTC Detection Condition Trouble Area MIL Note P033500 Crankshaft Position Sensor "A" No Signal (sub) No crankshaft position sensor signal to the sub ECM while engine running ECM Comes on SAE: P0335 MONITOR DESCRIPTION While the engine is running, when the NE signal is not input to the sub CPU even though the NE signal is input to the main CPU, the ECM judges that a malfunction has occurred in an internal ECM circuit, and illuminates the MIL and stores a DTC...

    Categories

    Fuel-Filler Lid and Cap

    WARNING

    When removing the fuel-filler cap, loosen the cap slightly and wait for any hissing to stop, then remove it

    Fuel spray is dangerous. Fuel can burn skin and eyes and cause illness if ingested. Fuel spray is released when there is pressure in the fuel tank and the fuel-filler cap is removed too quickly.

    read more

     
    Copyright © 2025 www.toyaris4.com