Toyota Yaris: G16e-gts (fuel) / Fuel Pressure Sensor (for High Pressure)

Installation

INSTALLATION CAUTION / NOTICE / HINT NOTICE: This procedure includes the installation of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts...

Components

COMPONENTS ILLUSTRATION *1 FUEL PRESSURE SENSOR *2 NO. 1 FUEL PRESSURE SENSOR HOLDER *3 NO. 1 ENGINE COVER SUB-ASSEMBLY - - Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N*m (kgf*cm, ft...

Other information:

Toyota Yaris XP210 (2020-2026) Reapir and Service Manual: Turn Signal Switch Circuit

DESCRIPTION The steering sensor receives the turn signal switch information and controls the turn signal lights. WIRING DIAGRAM PROCEDURE 1. READ VALUE USING GTS (a) Read the Data List according to the display on the GTS. Chassis > Steering Angle Sensor > Data List Tester Display Measurement Item Range Normal Condition Diagnostic Note Turn Signal Switch (Right) Turn signal switch (right) signal OFF or ON OFF: Turn signal switch not in right turn position ON: Turn signal switch in right turn position - Turn Signal Switch (Left) Turn signal switch (left) signal OFF or ON OFF: Turn signal switch not in left turn position ON: Turn signal switch in left turn position - Cornering Light/Front Side Illuminate Light Switch Turn signal switch (full turn) signal OFF or ON OFF: Turn signal switch not in left or right turn position ON: Turn signal switch in left or right full turn position - OK: Normal conditions listed above are displayed...

Toyota Yaris XP210 (2020-2026) Reapir and Service Manual: Inspection

INSPECTION PROCEDURE 1. INSPECT REAR STABILIZER LINK ASSEMBLY (a) Inspect the turning torque of the ball joint. (1) Secure the rear stabilizer link assembly in a vise using aluminum plates. NOTICE: Do not overtighten the vise. (2) Install the nut to the rear stabilizer link assembly stud...