Toyota Yaris: G16e-gts (engine Control) / Ecm

Crankshaft Position Sensor

ComponentsCOMPONENTS ILLUSTRATION *1 CRANKSHAFT POSITION SENSOR *2 O-RING Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping" : N*m (kgf*cm, ft...

Components

COMPONENTS ILLUSTRATION *1 NO. 1 AIR CLEANER INLET *2 NO. 1 AIR CLEANER HOSE *3 AIR CLEANER CASE SUB-ASSEMBLY *4 ECM *5 NO. 1 ECM BRACKET *6 NO...

Other information:

Toyota Yaris XP210 (2020-2026) Reapir and Service Manual: Calibration

CALIBRATION DESCRIPTION (a) Refer to the table below and then perform the necessary operation according to the part to be replaced in order to perform calibration. Parts to be Replaced / Operation Necessary Operation Skid control ECU (brake actuator assembly) Calibration Yaw rate and acceleration sensor (airbag sensor assembly) Calibration Wheel alignment adjustment Calibration UTILITY ITEMS Utility Items Main Purpose Link All Readiness Confirm if DTC judgment has been completed...

Toyota Yaris XP210 (2020-2026) Owner's Manual: Driving on Uneven Road

Your vehicle’s suspension and underbody can be damaged if driven on rough/uneven roads or over speed bumps at excessive speeds. Use care and reduce speed when traveling on rough/uneven roads or over speed bumps. Use care not to damage the vehicle’s underbody, bumpers or muffler(s) when driving under the following conditions: Ascending or descending a slope with a sharp transition angle Ascending or descending a driveway or trailer ramp with a sharp transition angle NOTICE This vehicle is equipped with low profile tires allowing class-leading performance and handling...