Toyota Yaris: Seat Belt / Front Seat Outer Belt Assembly

Toyota Yaris XP210 (2020-2026) Reapir and Service Manual / Vehicle Interior / Seat Belt / Front Seat Outer Belt Assembly

Installation

INSTALLATION CAUTION / NOTICE / HINT HINT: Use the same procedure for the driver side and front passenger side. The procedure listed below is for the driver side...

Precaution

PRECAUTION CAUTION: Replace any faulty parts of the seat belt systems (outer belt, inner belt, bolts, nuts, adjustable shoulder anchor, tether anchor hardware and other related parts)...

Other information:

Toyota Yaris XP210 (2020-2026) Reapir and Service Manual: Calibration


CALIBRATION NOTICE: When the AWD ECU assembly is replaced, before removing the AWD ECU assembly, it is necessary to perform ECU Data Save to save the original AWD ECU assembly information. When the AWD ECU assembly is replaced, it is necessary to perform the following in order: ECU Data Initialization and ECU Data Write...

Toyota Yaris XP210 (2020-2026) Reapir and Service Manual: Power Steering Torque Sensor "B" Supply Voltage Circuit Voltage Above Threshold (C151B17)


DESCRIPTION The power steering ECU assembly supplies a voltage of 5 V to the torque sensor (electric power steering column sub-assembly) and monitors the voltage value of the Hall IC inside the torque sensor (electric power steering column sub-assembly) which changes in response to changes in the magnetic flux density (steering torque) detected by the Hall IC, and calculates the assist torque...

Categories

Turning the Engine Off

Stop the vehicle completely. Manual transaxle: Shift into neutral and set the parking brake.

Automatic transaxle: Shift the selector lever to the P position and set the parking brake.

Press the push button start to turn off the engine. The ignition position is off.

read more

 
Copyright © 2026 www.toyaris4.com