Toyota Yaris: Clutch / Clutch Unit

Bleeding

BLEEDING CAUTION / NOTICE / HINT NOTICE: Wash off clutch fluid immediately if it comes in contact with any painted surface. HINT: If any work is performed on the clutch system or if air in the clutch lines is suspected, bleed air from the clutch hydraulic system...

Components

COMPONENTS ILLUSTRATION *1 COVER AND DISC CLUTCH SET *2 MANUAL TRANSAXLE ASSEMBLY *3 CLUTCH RELEASE CYLINDER WITH BEARING ASSEMBLY *4 CLUTCH TUBE BOOT *5 CLUTCH RELEASE CYLINDER TO BLEEDER TUBE *6 CLUTCH RELEASE BLEEDER SUB-ASSEMBLY *7 BLEEDER CLUTCH RELEASE TUBE *8 CLAMP *9 CLUTCH RELEASE BEARING PLATE - - Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N*m (kgf*cm, ft...

Other information:

Toyota Yaris XP210 (2020-2026) Reapir and Service Manual: Disassembly

DISASSEMBLY PROCEDURE 1. REMOVE LOWER DEFROSTER NOZZLE ASSEMBLY (a) Disengage the claws and guides to remove the lower defroster nozzle assembly. 2. REMOVE COOLER PIPE GROMMET (a) Remove the cooler pipe grommet. 3. REMOVE COOLER EXPANSION VALVE (a) Using a 4 mm hexagon socket wrench, remove the 2 hexagon bolts and cooler expansion valve...

Toyota Yaris XP210 (2020-2026) Reapir and Service Manual: Installation

INSTALLATION CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH side and LH side. The following procedure is for the LH side. PROCEDURE 1. INSTALL REAR DRIVE SHAFT INBOARD JOINT SHAFT SNAP RING (a) Install a new rear drive shaft inboard joint shaft snap ring to the rear drive shaft assembly...