Toyota Yaris: Wiper And Washer System / Utility
UTILITY
WIPER SPECIFICATION SWITCH
HINT:
Although this item is displayed on the GTS, it is not applicable to this vehicle.
(a) According to the display on the GTS, select Wiper Specification Switch.
Chassis > Steering Angle Sensor > Utility
Tester Display |
Wiper Specification Switch |
OPERATION CHECK CHECK FRONT WIPER CONTROL (a) Auto wiper function (1) Continuously apply water to the windshield glass in front of the rain sensor. (2) Turn the ignition switch to ON...
PROBLEM SYMPTOMS TABLE NOTICE: If the main body ECU (multiplex network body ECU) is replaced, refer to the Registration. Click here
HINT:
Use the table below to help determine the cause of problem symptoms...
Other information:
INSPECTION PROCEDURE 1. INSPECT AUTO HIGH BEAM SWITCH (a) Check the resistance. (1) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Condition Specified Condition H47-5 (+B) - H47-2 (E) Auto high beam switch off 10 kΩ or higher H47-5 (+B) - H47-2 (E) Auto high beam switch on Below 1 Ω If the result is not as specified, replace the auto high beam switch...
INITIALIZATION SERVO MOTOR INITIALIZATION (a) Press the OFF switch. (b) According to the GTS display, perform servo motor initialization. Body Electrical > Air Conditioner > Utility Tester Display Servomotor Initialization HINT: When initialization is started, the AUTO switch indicator will illuminate and then will turn off when initialization has completed...
Categories
![Toyota Yaris. Keys](images/books/1/toyota_yaris_keys_71.jpg)
Smart key
Auxiliary key
Key code number plate
To use the auxiliary key, press the knob and pull out the auxiliary key
from the smart key.
![Toyota Yaris. Keys](images/books/1/toyota_yaris_keys_72.jpg)
read more