Toyota Yaris: Turn and Lane-Change Signals / Three-Flash Turn Signal
After releasing the turn signal lever, the turn signal indicator flashes 3
times. The operation can be cancelled by moving the lever in the
direction opposite to which it was operated.
The three-flash turn signal function can be switched to operable/inoperable
using the customization function. Refer to
Customizable Features.
Move the lever halfway toward the direction of the lane change—until
the indicator flashes—and hold it there. It will return to the off position
when released...
The ignition must be switched ON to use the wipers.
Because heavy ice and snow can jam the wiper blades, the wiper motor is
protected from motor breakdown, overheating and possible fire by a circuit
breaker...
Other information:
CHECK FOR INTERMITTENT PROBLEMS NOTICE:
Operation history is stored in the RAM or EEPROM of the certification ECU (smart key ECU assembly). As the cause of a malfunction stored in the RAM will be cleared when the cable is disconnected from the negative (-) battery terminal, do not disconnect the cable from the negative (-) battery terminal before checking and recording are complete...
DESCRIPTION Symptom Trouble Area Check CAN Communication Connection
CAN main bus line, CAN branch line or connector
Power source circuit of central gateway ECU (network gateway ECU)
Central gateway ECU (network gateway ECU) ground circuit
Central gateway ECU (network gateway ECU)
Power source circuit of DLC3
DLC3 ground circuit
WIRING DIAGRAM
CAUTION / NOTICE / HINT CAUTION: When performing the confirmation driving pattern, obey all speed limits and traffic laws...
Categories
Before refueling, close all the doors, windows, and the liftgate/trunk
lid, and switch the ignition OFF.
To open the fuel-filler lid, pull
the remote fuel-filler lid release.

To remove the fuel-filler cap, turn it counterclockwise.
Attach the removed cap to the
inner side of the fuel-filler lid.
read more