Toyota Yaris: Vent Operation / Selecting the Airflow Mode

Adjusting the Vents

Air vent open/close The air vents can be fully opened and closed by operating the knob. Center vents (driver) and Side vents Open Close Center vents (front passenger) Open Close Directing airflow To adjust the direction of airflow, move the adjustment knob...

Manual Type

..

Other information:

Toyota Yaris XP210 (2020-2026) Reapir and Service Manual: Stop and Start Priority Control System

DESCRIPTION In stop and start control status, there is normal status (Standard) and stop and start priority status (Extended). Stop and start control status can be switched to the desired mode by pressing and holding the stop and start system cancel switch (combination switch assembly), or by operating the steering pad switch assembly, and the mode change is also shown on the multi-information display screen...

Toyota Yaris XP210 (2020-2026) Reapir and Service Manual: Calibration

CALIBRATION DESCRIPTION (a) Refer to the table below and then perform the necessary operation according to the part to be replaced in order to perform calibration. Parts to be Replaced / Operation Necessary Operation Skid control ECU (brake actuator assembly) Calibration Yaw rate and acceleration sensor (airbag sensor assembly) Calibration Wheel alignment adjustment Calibration UTILITY ITEMS Utility Items Main Purpose Link All Readiness Confirm if DTC judgment has been completed...