Toyota Yaris: Lighting (ext) / License Plate Light Bulb
Components
COMPONENTS
ILLUSTRATION
| *1 | LICENSE PLATE LIGHT BULB | *2 | LICENSE PLATE LIGHT LENS |
INSTALLATION CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
PROCEDURE 1...
Other information:
DESCRIPTION When TRC or VSC is operating, the skid control ECU (brake actuator assembly) blinks the slip indicator light to inform the driver that slippage occurred. When in VSC off mode, or TRC and VSC are disabled, the multi-information display in the combination meter assembly displays TRC OFF message and the VSC OFF indicator light illuminates to inform the driver...
ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT FRONT LOWER BALL JOINT ASSEMBLY (a) Check for looseness. (1) Lift up the vehicle. (2) Move the front lower No. 1 suspension arm sub-assembly up and down by hand with a force of 294 N (30 kgf) or more to check that there is no looseness at the front lower ball joint assembly...
Categories
Stop the vehicle completely.
Manual transaxle:
Shift into neutral and set the parking brake.
Automatic transaxle:
Shift the selector lever to the P position and set the parking brake.
Press the push button start to turn off the engine. The ignition position is
off.
read more