Toyota Yaris: Rear View Monitor / Rear View Parking Camera Location
4-Door

5-Door

Switching to the Rear View Monitor Display
Shift the shift lever to R with the ignition switched ON to switch the
display to the rear view monitor display.
When the shift lever is shifted from R to another shift lever position, the
screen returns to the previous display.
The rear view monitor provides visual images of the rear of the
vehicle when reversing.
If water, snow, or mud is stuck on the camera lens, wipe it off using a
soft
cloth...
The images on the screen may be different from the actual conditions.
Screen display
Actual view
The displayable range varies depending on the vehicle and road
conditions...
Other information:
ComponentsCOMPONENTS ILLUSTRATION
*1 CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) - - RemovalREMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the certification ECU (smart key ECU assembly) removal/installation are shown below...
InspectionINSPECTION PROCEDURE 1. INSPECT ST NO. 1 RELAY (a) Check the resistance. (1) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Condition Specified Condition 3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher Battery voltage applied to terminals 1 and 2 Below 1 Ω If the result is not as specified, replace the ST No...
Categories
The front seat belt pretensioners are designed to deploy in moderate or
severe frontal, near frontal collisions.
In addition, the pretensioners operate when a side collision or a rollover
accident is detected. The pretensioners operate differently
depending on what types of air bags are equipped. For more details
about the seat belt pretensioner operation, refer to the SRS Air Bag
Deployment Criteria.
read more