Toyota Yaris: Supplemental Restraint Systems / Front Seat Side Airbag Assembly
INSTALLATION PROCEDURE 1. INSTALL INSTRUMENT PANEL PASSENGER WITHOUT DOOR AIRBAG ASSEMBLY (a) Engage the hooks.
(b) Push in the instrument panel passenger without door airbag assembly to engage the hooks to the instrument panel sub-assembly...
COMPONENTS ILLUSTRATION
*A for Driver Side *B for Front Passenger Side *1 FRONT SEAT VERTICAL ADJUSTER HANDLE *2 NO.1 RECLINING HINGE COVER *3 RECLINING ADJUSTER RELEASE HANDLE *4 SEAT ADJUSTER COVER CAP *5 FRONT SEAT CUSHION SHIELD *6 FRONT SEAT INNER CUSHION SHIELD ILLUSTRATION
*1 SEPARATE TYPE FRONT SEATBACK ASSEMBLY - -
Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping" : N*m (kgf*cm, ft...
Other information:
FREEZE FRAME DATA DESCRIPTION (a) When an airbag system DTC is stored, the airbag sensor assembly stores the current vehicle (ECU, sensor or squib) state as Freeze Frame Data. CHECK FREEZE FRAME DATA CAUTION: Never measure the resistance of the SRS parts because current from the tester may cause the SRS parts to deploy...
DESCRIPTION If the millimeter wave radar sensor assembly cannot confirm the vehicle information (steering wheel position) sent from the main body ECU (multiplex network body ECU), the millimeter wave radar sensor assembly stores DTC U032251. DTC No...
Categories
The front and side supplemental restraint systems (SRS) include different
types of air bags. Please verify the different types of air bags
which are equipped on your vehicle by locating the “SRS AIRBAG”
location indicators. These indicators are visible in the area where the
air bags are installed.
The air bags are installed in the following locations:
The steering wheel hub (driver air bag)
The front passenger dashboard (front passenger air bag)
The outboard sides of the front seatbacks (side air bags)
The front and rear window pillars, and the roof edge along both
sides (curtain air bags)
read more