Toyota Yaris: Air Conditioning System / Freeze Frame Data

Toyota Yaris XP210 (2020-2026) Reapir and Service Manual / Vehicle Interior / Heating / Air Conditioning / Air Conditioning System / Freeze Frame Data

FREEZE FRAME DATA

HINT:

The ECU records vehicle and driving condition information as freeze frame data the moment a DTC is stored.

CHECK FREEZE FRAME DATA

(a) Select the DTCs (with snow icon) for which freeze frame data is recorded.

Body Electrical > Air Conditioner > Trouble Codes

LIST OF FREEZE FRAME DATA

Body Electrical > Air Conditioner

Tester Display

Total Distance Traveled

Total Distance Traveled - Unit

    Dtc Check / Clear

    D..

    Data List / Active Test

    DATA LIST / ACTIVE TEST DATA LIST NOTICE: In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not...

    Other information:

    Toyota Yaris XP210 (2020-2026) Reapir and Service Manual: Inspection


    INSPECTION PROCEDURE 1. INSPECT BRAKE CYLINDER AND PISTON (a) Check the front disc brake cylinder bore and front disc brake piston for rust and scoring. If necessary, replace the front disc brake cylinder assembly and front disc brake piston. 2. INSPECT PAD LINING THICKNESS (a) Using a ruler, measure the front disc brake pad lining thickness...

    Toyota Yaris XP210 (2020-2026) Reapir and Service Manual: Driver Frontal Stage 1 Deployment Control Circuit Open (B000113)


    DESCRIPTION DTC No. Detection Item DTC Detection Condition Trouble Area Warning Indicate Test Mode / Check Mode B000113 Driver Frontal Stage 1 Deployment Control Circuit Open The airbag sensor assembly detects an open in the driver seat airbag squib circuit for 2 seconds Spiral cable sub-assembly malfunction Horn button assembly malfunction Airbag sensor assembly malfunction Harness or connector Spiral cable sub-assembly Horn button assembly Airbag sensor assembly Comes on Applies to check mode WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE: After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal...

    Categories

    Turning the Engine Off

    Stop the vehicle completely. Manual transaxle: Shift into neutral and set the parking brake.

    Automatic transaxle: Shift the selector lever to the P position and set the parking brake.

    Press the push button start to turn off the engine. The ignition position is off.

    read more

     
    Copyright © 2026 www.toyaris4.com