Toyota Yaris: If Trouble Arises / Flat Tire

Parking in an Emergency

The hazard warning lights should always be used when you stop on or near a roadway in an emergency. The hazard warning lights warn other drivers that your vehicle is a traffic hazard and that they must take extreme caution when near it...

Spare Tire and Tool Storage

Spare tire and tools are stored in the locations illustrated in the diagram. 4-Door Spare tire Spare tire hold-down bolt Tool bag Jack Jack point attachment* 1 Jack lever Tiedown eyelet (if equipped) Lug wrench Flat tire belt* 1: The jack point attachment can be used by vehicle repair shops and road assistance services...

Other information:

Toyota Yaris XP210 (2020-2026) Reapir and Service Manual: Reassembly

REASSEMBLY PROCEDURE 1. INSTALL CLEAN AIR FILTER (a) Install the clean air filter. NOTICE: Make sure that the "UP" mark is facing the correct direction before installing the clean air filter. 2. INSTALL AIR FILTER COVER PLATE (a) Engage the guides and claw to install the air filter cover plate...

Toyota Yaris XP210 (2020-2026) Reapir and Service Manual: On-vehicle Inspection

ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT STOP LIGHT SWITCH ASSEMBLY (a) Disconnect the stop light switch assembly connector. (b) Measure the voltage and resistance on the wire harness side connector according to the value(s) in the table below. Standard Voltage: Tester Connection Condition Specified Condition A63-7 (B) - A63-2 (GND) Always 11 to 14 V A63-6 (B) - A63-2 (GND) Ignition switch on (IG) 11 to 14 V Standard Resistance: Tester Connection Condition Specified Condition A63-2 (GND) - Body ground Always Below 1 Ω If the result is not as specified, repair or replace the wire harness or connector...