Toyota Yaris: Cxpi Communication System / Dtc Check / Clear
DTC CHECK / CLEAR
CHECK DTC
(a) Enter the following menus: Body Electrical / Main Body / Trouble Codes.
(b) Check for DTCs.
Body Electrical > Main Body > Trouble Codes
CLEAR DTC
(a) Enter the following menus: Body Electrical / Main Body / Clear DTCs.
(b) Clear the DTCs.
Body Electrical > Main Body > Clear DTCs
TERMINALS OF ECU NOTICE:
After the ignition switch is turned off, there may be a waiting time before disconnecting the negative (-) auxiliary battery terminal...
Other information:
Warning Light
The warning light turns on when the system has a malfunction.
Refer to Warning Lights.
Transaxle Ranges
The shift position indicator light in the combination
meter illuminates. Refer to Warning/Indicator Lights.
The selector lever must be in P or N to operate the
starter...
DESCRIPTION These DTCs are stored when the engine speed signal sent by the ECM via direct line and the engine speed signal sent via CAN communication do not match. DTC No. Detection Item DTC Detection Condition Trouble Area Note P033562 Crankshaft Position Sensor "A" Signal Compare Failure The engine speed signal sent by the ECM via direct line and the engine speed signal sent via CAN communication do not match...
Categories
If a key is left in the vehicle, the functions of the key left in the vehicle
are temporarily suspended to prevent theft of the vehicle.
To restore the functions, press the unlock button on the functions-suspended
key in the vehicle.
read more