Toyota Yaris: Manual Transaxle System / Diagnostic Trouble Code Chart

Toyota Yaris XP210 (2020-2024) Reapir and Service Manual / Drivetrain / Ea67f (manual Transmission / Transaxle) / Manual Transaxle System / Diagnostic Trouble Code Chart

DIAGNOSTIC TROUBLE CODE CHART

MANUAL TRANSMISSION SYSTEM

DTC No.

Detection Item

MIL

Memory

Note

Link

P03352A

Crankshaft Position Sensor "A" Signal Stuck in Range

Comes on

DTC stored

SAE Code:

P0335

P033531

Crankshaft Position Sensor "A" No Signal

Comes on

DTC stored

SAE Code:

P0335

P050031

Vehicle Speed Sensor "A" No Signal

Comes on

DTC stored

SAE Code:

P0500

P071011

Transmission Fluid Temperature Sensor "A" Circuit Short To Ground

Does not come on

DTC stored

SAE Code:

P0712

P071015

Transmission Fluid Temperature Sensor "A" Circuit Short to Battery or Open

Does not come on

DTC stored

SAE Code:

P0713

P071512

Input/Turbine Speed Sensor "A" Circuit Short to Battery

Comes on

DTC stored

SAE Code:

P07C0

P071514

Input/Turbine Speed Sensor "A" Circuit Short to Ground or Open

Comes on

DTC stored

SAE Code:

P07BF

P080512

Clutch Position Sensor "A"Circuit Short to Battery

Does not come on

DTC stored

SAE Code:

P0808

P080514

Clutch Position Sensor "A"Circuit Short to Ground or Open

Does not come on

DTC stored

SAE Code:

P0807

    Fail-safe Chart

    F..

    Vehicle Control History

    V..

    Other information:

    Toyota Yaris XP210 (2020-2024) Reapir and Service Manual: ID-BOX Calibration / Parameter Memory Failure (B279046)


    DESCRIPTION When an internal malfunction occurs in the ID code box (immobiliser code ECU), the certification ECU (smart key ECU assembly) stores this DTC. DTC No. Detection Item DTC Detection Condition Trouble Area Note B279046 ID-BOX Calibration / Parameter Memory Failure An internal malfunction occurs in the ID code box (immobiliser code ECU) (EEPROM access malfunction) (1 trip detection logic*)...

    Toyota Yaris XP210 (2020-2024) Reapir and Service Manual: Installation


    INSTALLATION PROCEDURE 1. INSTALL STOP LIGHT SWITCH MOUNTING ADJUSTER (a) Engage the claws to install a new stop light switch mounting adjuster. 2. INSTALL STOP LIGHT SWITCH ASSEMBLY (a) Insert the stop light switch assembly to the stop light switch mounting adjuster until the switch body slightly touches the brake pedal...

    Categories

    Fuel-Filler Lid and Cap

    WARNING

    When removing the fuel-filler cap, loosen the cap slightly and wait for any hissing to stop, then remove it

    Fuel spray is dangerous. Fuel can burn skin and eyes and cause illness if ingested. Fuel spray is released when there is pressure in the fuel tank and the fuel-filler cap is removed too quickly.

    read more

     
    Copyright © 2024 www.toyaris4.com