Toyota Yaris: Wireless Door Lock Control System / Customize Parameters

Toyota Yaris XP210 (2020-2026) Reapir and Service Manual / Vehicle Interior / Door Lock / Wireless Door Lock Control System / Customize Parameters

CUSTOMIZE PARAMETERS

CUSTOMIZE WIRELESS DOOR LOCK CONTROL SYSTEM

NOTICE:

When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.

HINT:

The following items can be customized.

(a) Customizing with the GTS

(1) Select the setting by referring to the table below.

Wireless Door Lock

Tester Display	Description	Default	Setting	ECU
Wireless Control Function	Function that turns the wireless door lock control system on or off	Enable	$00:Disable,$01:Enable	Main body ECU (Multiplex network body ECU)
Wireless Buzzer Response Function	Function that enables/disables the wireless door lock buzzer response.	Enable	$00:Disable,$01:Enable	Main body ECU (Multiplex network body ECU)
Hazard Answer Back Function	Function that flashes the hazard warning lights once when the doors are locked by wireless operation and twice when the doors are unlocked by wireless operation.	Enable	$00:Disable,$01:Enable	Main body ECU (Multiplex network body ECU)
Wireless Buzzer Volume Setting	Function that adjusts the wireless door lock buzzer volume.	Level5	$00:Level7(MAX),$01:Level6,$02:Level5,$03:Level4,$04:Level3,$05:Level2,$06:Level1,$07:Level0(MIN)	Main body ECU (Multiplex network body ECU)

Door Lock

Tester Display	Description	Default	Setting	ECU
Open Door Warning Function	Function that sounds a buzzer when the lock switch is pressed when any of the doors are ajar.	Enable	$00:Disable,$01:Enable	Main body ECU (Multiplex network body ECU)
Door Auto Lock Timer Setting	Function that regulates the interval between unlocking and automatic relocking of the doors.	30sec	$00:30sec,$01:60sec,$02:120sec	Main body ECU (Multiplex network body ECU)

Operation Check

OPERATION CHECK CHECK CUSTOMIZE PARAMETERS NOTICE: The operation check below is based on the non-customized initial condition of the vehicle. Click here HINT: The switches described in this text are the switches for transmitting signals...

Problem Symptoms Table

PROBLEM SYMPTOMS TABLE HINT: Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table...

Other information:

Toyota Yaris XP210 (2020-2026) Reapir and Service Manual: Ignition Circuit

DESCRIPTION A direct ignition system is used on this vehicle. The direct ignition system is a 1 cylinder ignition system which ignites one cylinder with one ignition coil. In the 1 cylinder ignition system, one spark plug is connected to the end of the secondary winding...

Toyota Yaris XP210 (2020-2026) Reapir and Service Manual: Fail-safe Chart

FAIL-SAFE CHART If any of the following DTCs are stored, the engine stop and start ECU enters fail-safe mode to preserve vehicle operability. DTC Component Fail-safe Operation Fail-safe Deactivation Condition P033562 Open in engine speed signal circuit Stop and start control is prohibited Engine is automatically restarted if a DTC is stored while the engine is stopped by stop and start control All of the following conditions are met for 10 seconds: Normal communication with ECM Engine speed 500 rpm or higher Engine speed (communication signal) 500 rpm or higher Difference between engine speed from pulse signal and engine speed from communication signal is less than 100 rpm P055500 P05552A Vacuum sensor assembly Brake booster assembly Vacuum hose (brake booster hose) Stop and start control is prohibited Engine is automatically restarted if a DTC is stored while the engine is stopped by stop and start control One of the following conditions is met: Vacuum changes while the brake pedal is depressed Vacuum changes a specified number of times while the vehicle is being driven faster than a certain vehicle speed P055511 P055515 Vacuum sensor assembly circuit Stop and start control is prohibited Engine is automatically restarted if a DTC is stored while the engine is stopped by stop and start control Sensor output is within standard range P060629 Engine stop and start ECU Stop and start control is prohibited Engine is automatically restarted if a DTC is stored while the engine is stopped by stop and start control Pass condition detected and ignition switch turned to ON P060B1C P060B49 P060B71 Analog to digital converter (Engine stop and start ECU) Stop and start control is prohibited Engine is automatically restarted if a DTC is stored while the engine is stopped by stop and start control Pass condition detected and ignition switch turned to ON P061519 ST NO...