Toyota Yaris: G16e-gts (intake / Exhaust) / Air Cleaner Filter Element
Components
COMPONENTS
ILLUSTRATION
*1 | AIR CLEANER CAP SUB-ASSEMBLY | *2 | AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY |
Other information:
REPAIR PROCEDURE 1. REPAIR INTAKE VALVE SEAT NOTICE:
While repairing the intake valve seat, make sure to constantly check the valve seat width and valve seating position.
Release the cutter gradually to make the intake valve seat smooth.
(a) Using a 45° cutter, resurface the intake valve seat so that the intake valve seat width is more than the standard...
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during the main body ECU (multiplex network body ECU) removal/installation are shown below...
Categories
The front and side supplemental restraint systems (SRS) include different
types of air bags. Please verify the different types of air bags
which are equipped on your vehicle by locating the “SRS AIRBAG”
location indicators. These indicators are visible in the area where the
air bags are installed.
The air bags are installed in the following locations:
The steering wheel hub (driver air bag)
The front passenger dashboard (front passenger air bag)
The outboard sides of the front seatbacks (side air bags)
The front and rear window pillars, and the roof edge along both
sides (curtain air bags)
read more