Toyota Yaris: Bluetooth® / Troubleshooting
If you have any problems with Bluetooth®, contact our toll-free customer
service center.
Apple CarPlay™ use-related issues


Android Auto™ use-related issues


Bluetooth® Device pairing, connection problems


* 1: Setting which detects the existence of a device external to the
Bluetooth® unit
Voice recognition related problems


Regarding problems with calls

Other problems


Bluetooth® Device pairing, connection problems
- When the OS of the device is updated, the pairing information may
be
deleted. If this happens, reprogram the pairing information to the
Bluetooth®
unit.
- If you pair your phone which has already been paired to your vehicle
more
than once in the past, you need to delete “Toyota” on your mobile device.
Then, execute the Bluetooth® search on your mobile device once again,
and pair to a newly detected “Toyota”.
- Before you pair your device, make sure that Bluetooth® is “ON”, both on
your phone and on the vehicle.
What is Stitcher™ Radio?
Stitcher™* 1 radio is an application which can be used to listen to
Internet radio or stream podcasts.
Recommended content is automatically selected by registering
content which you put into your favorites, or by pressing the Like or
Dislike button...
Other information:
REMOVAL CAUTION / NOTICE / HINT CAUTION: Wear protective gloves. Sharp areas on the parts may injure your hands.
HINT:
When the cable is disconnected / reconnected to the auxiliary battery terminal, systems temporarily stop operating. However, each system has a function that completes learning the first time the system is used...
INSTALLATION CAUTION / NOTICE / HINT NOTICE:
When replacing the windshield glass of a vehicle equipped with a forward recognition camera, make sure to use a Toyota genuine part. If a non-Toyota genuine part is used, the forward recognition camera may not be able to be installed due to a missing bracket...
Categories
Stop the vehicle completely.
Manual transaxle:
Shift into neutral and set the parking brake.
Automatic transaxle:
Shift the selector lever to the P position and set the parking brake.
Press the push button start to turn off the engine. The ignition position is
off.
read more