Toyota Yaris: Wireless Door Lock Control System / How To Proceed With Troubleshooting

Toyota Yaris XP210 (2020-2025) Reapir and Service Manual / Vehicle Interior / Door Lock / Wireless Door Lock Control System / How To Proceed With Troubleshooting

CAUTION / NOTICE / HINT

HINT:

  • Replace parts related to the wireless door lock and smart key system according to the inspection procedure.
  • If the wireless door lock and smart key system does not operate, first check the customize item and make sure that the wireless door lock and smart key system is not turned off.
  • The wireless door lock and smart key system primarily uses the following systems.
    • Power door lock system
    • Wireless door lock system
    • Smart key system (for Entry Function)
    • Smart key system (for Start Function)
      • : Steering lock function
      • : Immobiliser function
  • Perform troubleshooting procedures with other registered keys if available.

PROCEDURE

1.

VEHICLE BROUGHT TO WORKSHOP

(a) Confirm how vehicle was brought to workshop

  • Vehicle was driven
  • Vehicle was towed

HINT:

The malfunction location may be narrowed down by confirming whether the vehicle was driven or towed.

NEXT

GO TO SMART KEY SYSTEM (for Start Function)

    System Diagram

    S..

    Operation Check

    OPERATION CHECK CHECK CUSTOMIZE PARAMETERS NOTICE: The operation check below is based on the non-customized initial condition of the vehicle. Click here HINT: The switches described in this text are the switches for transmitting signals...

    Other information:

    Toyota Yaris XP210 (2020-2025) Reapir and Service Manual: Trouble in Passenger Airbag ON/OFF Indicator


    DESCRIPTION This circuit detects the airbag cut off switch cylinder sub-assembly status. The passenger airbag ON/OFF indicator comes on to inform the driver of the instrument panel passenger without door airbag assembly status (activated or deactivated)...

    Toyota Yaris XP210 (2020-2025) Reapir and Service Manual: Starter Signal Circuit


    DESCRIPTION While the engine is being cranked, current flows from terminal STAR of the certification ECU (smart key ECU assembly) to the clutch start switch assembly and to terminal STA of the ECM (STA signal). WIRING DIAGRAM Refer to DTC P061512. Click here CAUTION / NOTICE / HINT NOTICE: Inspect the fuses for circuits related to this system before performing the following procedure...

    Categories

    Liftgate/Trunk Lid

    WARNING

    Never allow a person to ride in the luggage compartment/trunk

    Allowing a person to ride in the luggage compartment/trunk is dangerous. The person in the luggage compartment/trunk could be seriously injured or killed during sudden braking or a collision.

    Do not drive with the liftgate/trunk lid open

    read more

     
    Copyright © 2025 www.toyaris4.com