Toyota Yaris: Front Radar Sensor System / Dtc Check / Clear

Toyota Yaris XP210 (2020-2026) Reapir and Service Manual / Engine & Hybrid System / Cruise Control / Front Radar Sensor System / Dtc Check / Clear

DTC CHECK / CLEAR

CHECK DTC

(a) Check for DTCs (Test Failed / Pending / Confirmed).

Body Electrical > Front Radar Sensor > Trouble Codes

GTS Display	Description
Test Failed	Represent malfunctions that were detected during the current trip.
Pending	Represent malfunctions which have occurred since the DTCs were last cleared but have not been confirmed.
Confirmed	Represent malfunctions which have occurred since the DTCs were last cleared and have been confirmed. (The number of trips since the DTC was stored may differ for each DTC.)

HINT:

Freeze frame data is stored respectively for pending DTCs, confirmed DTCs and the latest DTCs.

CLEAR DTC

(a) Clear the DTCs.

Body Electrical > Front Radar Sensor > Clear DTCs

HINT:

Clearing the DTCs will also clear the freeze frame data.

Diagnosis System

DIAGNOSIS SYSTEM DIAGNOSIS FUNCTION (a) If a malfunction is detected in the millimeter wave radar sensor assembly, the millimeter wave radar sensor assembly stores DTCs without directly informing the driver, and sends malfunction signals to the systems that use the millimeter wave radar sensor assembly...

Freeze Frame Data

FREEZE FRAME DATA DESCRIPTION (a) Whenever a front radar sensor system DTC is stored, the millimeter wave radar sensor assembly stores the current vehicle state as Freeze Frame Data...

Other information:

Toyota Yaris XP210 (2020-2026) Reapir and Service Manual: Steering Lock System Missing Message (B278187)

DESCRIPTION This DTC is stored when LIN communication between the certification ECU (smart key ECU assembly) and steering lock ECU (steering lock actuator or upper bracket assembly) stops for 10 seconds or more. DTC No. Detection Item DTC Detection Condition Trouble Area B278187 Steering Lock System Missing Message No communication between certification ECU (smart key ECU assembly) and steering lock ECU (steering lock actuator or upper bracket assembly) for 10 seconds or more...

Toyota Yaris XP210 (2020-2026) Reapir and Service Manual: Reassembly

REASSEMBLY PROCEDURE 1. INSTALL GENERATOR DRIVE END FRAME BEARING (a) Using SST and a press, install a new generator drive end frame bearing. SST: 09950-60011 09951-00470 SST: 09950-70010 09951-07100 (b) Fit the tabs of the retainer plate into the cutouts of the generator drive end frame to install the retainer plate...