Toyota Yaris: Storage Compartments / Center Console Tray

Toyota Yaris XP210 (2020-2026) Owner's Manual / Interior Features / Interior Equipment / Storage Compartments / Center Console Tray

A cup or small items can be placed on the center console tray using the center console divider.

The center console tray is large enough to place a small item when the center console divider is not in use.

Toyota Yaris. Center Console Tray

WARNING

Never use a cup holder to hold hot liquids while the vehicle is moving

Using a cup holder to hold hot liquids while the vehicle is moving is dangerous. If the contents spill, you could be scalded.

Glove Compartment

To open the glove compartment, pull the latch toward you. To close the glove compartment, firmly press in the center of the glove compartment lid...

Cargo Sub-Compartment (4-Door)

L..

Other information:

Toyota Yaris XP210 (2020-2026) Reapir and Service Manual: Front Right Microphone Circuit Component Internal Failure (B1AA696,B1AA71C)

DESCRIPTION These DTCs are stored when a malfunction occurs in the active noise control microphone RH system. DTC No. Detection Item DTC Detection Condition Trouble Area B1AA696 Front Right Microphone Circuit Component Internal Failure Stereo component equalizer assembly detects malfunction in active noise control microphone RH for 4 seconds or more continuously when engine speed is 1200 rpm or more* Harness or connector Active noise control microphone RH Stereo component equalizer assembly B1AA71C Front Right Microphone Circuit Circuit Voltage Out of Range Stereo component equalizer assembly detects active noise control microphone RH connection malfunction for 4 seconds or more continuously* Harness or connector Active noise control microphone RH Stereo component equalizer assembly HINT: *: Malfunction monitoring is not performed under the following conditions, in order to prevent erroneous detection...

Toyota Yaris XP210 (2020-2026) Reapir and Service Manual: Registration

REGISTRATION PROCEDURE 1. ECU EXCHANGE NOTICE: When replacing the engine stop and start ECU, make sure to download the number of starter operations (step 1). After replacing the engine stop and start ECU (step 2), write the number of starter operations to the new engine stop and start ECU (step 3)...