Toyota Yaris: How to Arm the System / To Stop the Alarm
A triggered alarm can be turned off using any one of the following
methods:
- Pressing the unlock button or the trunk button (4-door) on the smart
key.
- Starting the engine with the push button start.
- With the advanced keyless function: Pressing a request switch on the
doors.
The hazard warning lights will flash twice.
An armed system can be turned off using any one of the following
methods:
Pressing the unlock button on the smart key.
Starting the engine with the push button start...
Other information:
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed, installed, or replaced during the engine stop and start ECU removal/installation are shown below...
INSTALLATION PROCEDURE 1. INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY (a) Install a new gasket to the fuel tank assembly. (b) Connect the fuel return vent tube sub-assembly to the fuel suction tube with pump and gauge assembly. Click here
*1 Fuel Return Vent Tube Sub-assembly
Front of the Vehicle
Make sure to correctly assemble the fuel return vent tube sub-assembly as shown in the illustration...
Categories
WARNING
When removing the fuel-filler cap, loosen the cap slightly and wait
for
any hissing to stop, then remove it
Fuel spray is dangerous. Fuel can burn skin and eyes and cause illness
if
ingested. Fuel spray is released when there is pressure in the fuel tank and
the fuel-filler cap is removed too quickly.
read more