Toyota Yaris: When Driving / Start/Stop Engine

When Driving

..

Ignition Switch

Push Button Start Positions The system operates only when the driver is in the vehicle or within operational range while the key is being carried. Each time the push button start is pressed, the ignition switches in the order of off, ACC, and ON...

Other information:

Toyota Yaris XP210 (2020-2025) Reapir and Service Manual: Deterioration of Battery Low Capacity (P160200)

DESCRIPTION The auxiliary battery condition is calculated from the voltage when the engine is running (except when cranking) and then output to the ECM. A DTC is output when auxiliary battery degradation is determined based on this signal. DTC No. Detection Item DTC Detection Condition Trouble Area MIL Note P160200 Deterioration of Battery Low Capacity While engine is running (except when cranking), auxiliary battery capacity is abnormally low for 10 seconds or more...

Toyota Yaris XP210 (2020-2025) Reapir and Service Manual: Installation

INSTALLATION PROCEDURE 1. INSTALL CAMSHAFT POSITION SENSOR (for Intake Side) (a) Clean the O-ring groove of the camshaft position sensor. NOTICE: Make sure the O-ring groove is free of foreign matter. (b) Install a new O-ring to the camshaft position sensor...