Toyota Yaris: Transaxle / Manual Transaxle Operation

Toyota Yaris XP210 (2020-2025) Owner's Manual / When Driving / Transaxle / Manual Transaxle Operation

Transaxle

..

Manual Transaxle Shift Pattern

The shift pattern of the transaxle is conventional, as shown. Depress the clutch pedal all the way down while shifting; then release it slowly. Your vehicle is equipped with a device to prevent shifting to R (reverse) by mistake...

Other information:

Toyota Yaris XP210 (2020-2025) Reapir and Service Manual: Failure to Restart from IG-ON Engine Stall


DESCRIPTION This is the troubleshooting procedure for situations where the engine does not restart when attempting to restart it after either a failed engine start occurred under stop and start system control, or a mis-operation during vehicle takeoff resulted in an engine stall...

Toyota Yaris XP210 (2020-2025) Reapir and Service Manual: General Information


GENERAL INFORMATION A large number of ECU controlled systems are used in this vehicle. In general, ECU controlled systems are considered to be very intricate, requiring a high level of technical knowledge to troubleshoot. However, most problem checking procedures only involve inspecting the ECU controlled system circuits one by one...

Categories

Front Seat Belt Pretensioners

The front seat belt pretensioners are designed to deploy in moderate or severe frontal, near frontal collisions.

In addition, the pretensioners operate when a side collision or a rollover accident is detected. The pretensioners operate differently depending on what types of air bags are equipped. For more details about the seat belt pretensioner operation, refer to the SRS Air Bag Deployment Criteria.

read more

 
Copyright © 2025 www.toyaris4.com