Toyota Yaris: When Driving / Fuel Economy Monitor (If equipped)

Toyota Yaris XP210 (2020-2026) Owner's Manual / When Driving / Fuel Economy Monitor (If equipped)

The Fuel Consumption information is displayed by operating each icon in the display.

In addition, after completing a trip, the total energy efficiency to date is displayed in the ending display when the ending display is turned on.

Select the icon on the home screen to display the Applications screen.
Select the “Fuel Economy Monitor”.
Operate the commander switch or touch the screen and display the menu.
When the menu is displayed by touching the screen, the display is hidden automatically after 6 seconds.
Select the icon in the menu and perform the operation. Each icon operates as follows:
1. Hides the menu display.
2. Displays the Applications screen.
3. Resets the fuel economy data.
4. Displays the following setting screen.
  - Ending display on/off switching
  - On/off switching for function which synchronizes (links) reset of fuel economy data with trip meter (TRIP A)

DSC OFF Switch

Press the DSC OFF switch to turn off the TCS/DSC. The DSC OFF indicator light in the combination meter will illuminate. Press the switch again to turn the TCS/DSC back on...

Fuel Consumption Display

Information regarding the fuel economy is displayed. Displays the fuel economy for the past 60 minutes. Displays the fuel economy every minute for the past 1 to 10 minutes...

Other information:

Toyota Yaris XP210 (2020-2026) Reapir and Service Manual: Inspection

INSPECTION PROCEDURE 1. INSPECT STEERING PAD SWITCH ASSEMBLY (w/ Dynamic Radar Cruise Control System) (a) Check the resistance. (1) Measure the resistance according to the value(s) in the table below. *a Component without harness connected (Steering Pad Switch Assembly) *b Up *c Down *d Right *e Left *f OK *g Back *h On/off Hook *i Voice *j Volume+ *k Volume- *l Seek+ *m Seek- *n MODE *o +RES *p -SET *q CANCEL *r Lane Tracing Assist *s Distance Control *t Cruise Control Main Standard Resistance: Tester Connection Condition Specified Condition 3 (AU1) - 10 (EAU) No switch pushed 95 to 105 kΩ 3 (AU1) - 10 (EAU) Seek+ switch pushed Below 2...

Toyota Yaris XP210 (2020-2026) Owner's Manual: Operating Tips for AAC

AAC stands for Advanced Audio Coding, which is standardized voice compression established by the ISO* 1 working group (MPEG). Audio data can be created and stored at a higher compression ratio than MP3. This unit plays files with the extensions (...