Toyota Yaris: Seat / Front Seat Assembly

Seat

..

Precaution

PRECAUTION HINT: The following procedures are used to prevent wrinkles from forming when installing the seat cover. Make sure to follow the procedures correctly...

Other information:

Toyota Yaris XP210 (2020-2026) Reapir and Service Manual: Inspection

INSPECTION PROCEDURE 1. INSPECT STEERING PAD SWITCH ASSEMBLY (w/ Dynamic Radar Cruise Control System) (a) Check the resistance. (1) Measure the resistance according to the value(s) in the table below. *a Component without harness connected (Steering Pad Switch Assembly) *b Up *c Down *d Right *e Left *f OK *g Back *h On/off Hook *i Voice *j Volume+ *k Volume- *l Seek+ *m Seek- *n MODE *o +RES *p -SET *q CANCEL *r Lane Tracing Assist *s Distance Control *t Cruise Control Main Standard Resistance: Tester Connection Condition Specified Condition 3 (AU1) - 10 (EAU) No switch pushed 95 to 105 kΩ 3 (AU1) - 10 (EAU) Seek+ switch pushed Below 2...

Toyota Yaris XP210 (2020-2026) Reapir and Service Manual: Operation Check

OPERATION CHECK CHECK FRONT SEAT HEATER (a) for LH Side: (1) Turn the ignition switch to ON. (2) Set the seat heater switch LH to "HI" or "LO" and check that the seat heater operates. OK: Seat cushion side and seatback side operate together (3) Operate the seat heater switch LH to switch the seat heater to "HI" or "LO" and check that the heater level indicator illuminates or turns off...