Toyota Yaris: Air Conditioning System / Front Right Air Mix Damper Control Servo Motor Actuator Stuck Off (B145B7F)

Toyota Yaris XP210 (2020-2026) Reapir and Service Manual / Vehicle Interior / Heating / Air Conditioning / Air Conditioning System / Front Right Air Mix Damper Control Servo Motor Actuator Stuck Off (B145B7F)

DESCRIPTION

The No. 1 air conditioning radiator damper servo sub-assembly sends pulse signals to inform the air conditioning amplifier assembly of the damper position. The air conditioning amplifier assembly activates the motor (normal or reverse) based on these signals to move the air outlet damper to the appropriate position, which controls the air outlet switching.

The air conditioning amplifier assembly communicates with the servo through a communication/driver IC and wiring assembly called the air conditioning harness assembly.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area	Memory
B145B7F	Front Right Air Mix Damper Control Servo Motor Actuator Stuck Off	Diagnosis Condition: No. 1 air conditioning radiator damper servo sub-assembly operating Malfunction Status: Damper servo operation request signals are output but the damper position sensor value does not change or abnormal Detection Time: Continuously for 30 seconds or more	No. 1 air conditioning radiator damper servo sub-assembly Air conditioning harness assembly Air conditioning radiator assembly	Memorized

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

Memory

B145B7F

Front Right Air Mix Damper Control Servo Motor Actuator Stuck Off

Diagnosis Condition:

No. 1 air conditioning radiator damper servo sub-assembly operating

Malfunction Status:

Damper servo operation request signals are output but the damper position sensor value does not change or abnormal

Detection Time:

Continuously for 30 seconds or more

No. 1 air conditioning radiator damper servo sub-assembly
Air conditioning harness assembly
Air conditioning radiator assembly

Memorized

DTC Detection Condition Combination Table

		Vehicle Condition
		Pattern 1	Pattern 2
Diagnosis Condition	No. 1 air conditioning radiator damper servo sub-assembly operating	○	○
Malfunction	Damper servo operation request signals are output but the damper position sensor value does not change	○	-
Malfunction	Damper servo operation request signals are output but the damper position sensor value is abnormal	-	○
Detection Time		Continuously for 30 seconds or more	Continuously for 30 seconds or more
Trip Count		1 trip	1 trip

HINT:

If the conditions of either of these patterns are detected, a DTC will be stored

CAUTION / NOTICE / HINT

NOTICE:

This DTC is also output for the damper link, damper lock, etc. Before performing inspection, perform servomotor initialization and check that there are no mechanical malfunctions.
Click here
This DTC is also output when servomotor initialization has failed. When servomotor initialization has failed, repair any malfunctions and perform servomotor initialization again.
Click here

PROCEDURE

1.	CHECK NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (INSTALLATION CONDITION)

(a) Check that the No. 1 air conditioning radiator damper servo sub-assembly is installed correctly.

Click here

OK:

The No. 1 air conditioning radiator damper servo sub-assembly is installed correctly.

INSTALL NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY CORRECTLY

2.	CHECK NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (MOTOR, LINK, DAMPER)

(a) Check for a wire harness caught between the links of the motors and dampers.

OK:

No wire harnesses are caught between the links of the motors and dampers.

REMOVE PINCHED WIRE HARNESS

3.	CHECK AIR CONDITIONING RADIATOR ASSEMBLY (DAMPER)

(a) Remove the No. 1 air conditioning radiator damper servo sub-assembly.

Click here

(b) Operate the dampers by hand.

OK:

The dampers are easily operated by hand.

REPLACE NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY

REPLACE AIR CONDITIONING RADIATOR ASSEMBLY

Lost Communication with Front Right Air Mix Damper Control Servo Motor LIN Missing Message (B145A87)

DESCRIPTION The air conditioning harness assembly connects the air conditioning amplifier assembly and the No. 1 air conditioning radiator damper servo sub-assembly...

Lost Communication with Front Panel LIN Missing Message (B14B287)

DESCRIPTION The air conditioning control assembly communicates with the air conditioning amplifier assembly via LIN communication. If a malfunction occurs in the LIN communication system, the air conditioning amplifier assembly will not operate, even if the air conditioning control assembly is operated...

Other information:

Toyota Yaris XP210 (2020-2026) Reapir and Service Manual: Turn Signal Switch Circuit

DESCRIPTION The steering sensor receives the turn signal switch information and controls the turn signal lights. WIRING DIAGRAM PROCEDURE 1. READ VALUE USING GTS (a) Read the Data List according to the display on the GTS. Chassis > Steering Angle Sensor > Data List Tester Display Measurement Item Range Normal Condition Diagnostic Note Turn Signal Switch (Right) Turn signal switch (right) signal OFF or ON OFF: Turn signal switch not in right turn position ON: Turn signal switch in right turn position - Turn Signal Switch (Left) Turn signal switch (left) signal OFF or ON OFF: Turn signal switch not in left turn position ON: Turn signal switch in left turn position - Cornering Light/Front Side Illuminate Light Switch Turn signal switch (full turn) signal OFF or ON OFF: Turn signal switch not in left or right turn position ON: Turn signal switch in left or right full turn position - OK: Normal conditions listed above are displayed...

Toyota Yaris XP210 (2020-2026) Reapir and Service Manual: Initialization

INITIALIZATION SERVO MOTOR INITIALIZATION (a) Press the OFF switch. (b) According to the GTS display, perform servo motor initialization. Body Electrical > Air Conditioner > Utility Tester Display Servomotor Initialization HINT: When initialization is started, the AUTO switch indicator will illuminate and then will turn off when initialization has completed...