Toyota Yaris: Lighting System / Customize Parameters

Toyota Yaris XP210 (2020-2025) Reapir and Service Manual / Vehicle Interior / Lighting (int) / Lighting System / Customize Parameters

CUSTOMIZE PARAMETERS

CUSTOMIZE LIGHTING SYSTEM (INT)

NOTICE:

When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.

HINT:

The following items can be customized.

(a) Customizing using the GTS

(1) Select the setting by referring to the table below.

Illuminated Entry

Tester Display	Description	Default	Setting	ECU
Interior Lights ON when Approached Function	Lights up the following lights when the map light assembly door linked switch is on the room light assembly switch is set to DOOR, and the electrical key transmitter sub-assembly is brought near the vehicle: Map light assembly Room light assembly Front door ambient illumination light (front door trim board sub-assembly)*1	Enable	$00:Disable,$01:Enable	Main body ECU (Multiplex network body ECU)
Interior Lights ON when Door Unlocked Function	Lights up the following lights automatically when the map light assembly door linked switch is on the room light assembly switch is set to DOOR, and the doors are unlocked by an unlock operation: Map light assembly Room light assembly Front door ambient illumination light (front door trim board sub-assembly)*1	Enable	$00:Disable,$01:Enable	Main body ECU (Multiplex network body ECU)
Interior Lights ON when IG OFF Function	Lights up the following lights automatically when the map light assembly door linked switch is on the room assembly) switch is set to DOOR, and the ignition switch is turned from ON or ACC to off: Map light assembly Room light assembly Front door ambient illumination light (front door trim board sub-assembly)*1	Enable	$00:Disable,$01:Enable	Main body ECU (Multiplex network body ECU)
Light Control Function	Dims the following lights when the ignition switch is ON and the shift lever is moved to any position other than P: Map light assembly Room light assembly Front door ambient illumination light (front door trim board sub-assembly)*1	Enable	$00:Disable,$01:Enable	Main body ECU (Multiplex network body ECU)
Interior Illumination Light 1 Function	Function of lighting Interior Illumination. Interior Illumination Light is being interlocked with Inside Foot Light.*2	Enable	$00:Disable,$01:Enable	Main body ECU (Multiplex network body ECU)
Interior Lights Lighting Timer Setting	Changes the lighting time of the following lights that are operated by the timer function when the DOOR switch of the map light assembly and room light assembly is on	Normal	$00:Normal,$01:Short,$02:Long	Main body ECU (Multiplex network body ECU)
Interior Lights ON Function	Function to set the lighting control of interior lights. Map light assembly Room light assembly Front door ambient illumination light (front door trim board sub-assembly)*1	Enable	$00:Disable,$01:Enable	Main body ECU (Multiplex network body ECU)

*1: w/ Ambient Illumination Light
*2: for vehicles displaying the Item "Interior Illumination Light 1 Function" on the GTS

Operation Check

OPERATION CHECK INSPECT ILLUMINATED ENTRY SYSTEM OPERATION NOTICE: Perform this inspection with the customize parameters at the initial settings. Click here HINT: Perform this inspection with the map light assembly door linked switch on and the room light assembly switch set to DOOR...

Problem Symptoms Table

PROBLEM SYMPTOMS TABLE NOTICE: Before replacing the main body ECU (multiplex network body ECU) or certification ECU (smart key ECU assembly), refer to Registration...

Other information:

Toyota Yaris XP210 (2020-2025) Reapir and Service Manual: Security Indicator Light Does not Blink

DESCRIPTION The certification ECU (smart key ECU assembly) blinks the security indicator light (combination meter assembly) when the immobiliser is set (engine switch off). The certification ECU (smart key ECU assembly) receives the security indicator light signal from the main body ECU (multiplex network body ECU) via CAN communication when the theft deterrent system is in the arming preparation state or alarm sounding state...

Toyota Yaris XP210 (2020-2025) Reapir and Service Manual: Front Recognition Camera Heater Malfunction (C1AAE00)

DESCRIPTION The forward recognition camera controls the flow of current to the forward recognition with heater hood sub-assembly. If the forward recognition camera detects a malfunction in the forward recognition with heater hood sub-assembly circuit, it will store this DTC...