Toyota Yaris: Air Conditioning System / Customize Parameters

Toyota Yaris XP210 (2020-2024) Reapir and Service Manual / Vehicle Interior / Heating / Air Conditioning / Air Conditioning System / Customize Parameters

CUSTOMIZE PARAMETERS

CUSTOMIZE AIR CONDITIONING SYSTEM

(a) Customizing with the GTS.

NOTICE:

  • When the customer requests a change in a function, first make sure that the function can be customized.
  • Be sure to make a note of the current settings before customizing.
  • When troubleshooting a function, first make sure that the function is set to the default setting.

HINT:

The following items can be customized.

(1) Select the setting by referring to the table below.

Air Conditioner

Tester Display

Description

Default

Setting

ECU

Foot/DEF Automatic Blow Up Function

Function to increase the blower level automatically when the defroster is on

ON

$00:OFF,$01:ON

Air conditioning amplifier assembly

Foot/DEF Auto Mode

Function to change the air outlet mode to foot/defroster automatically when AUTO mode is on

ON

$00:OFF,$01:ON

Air conditioning amplifier assembly

Efficient Ventilation Mode

Function to change the mode automatically to recirculation air mode when turning the A/C on to cool the cabin quickly

ON

$00:OFF,$01:ON

Air conditioning amplifier assembly

ECO Mode Control

Function to disable the operation of the ECO switch assembly (air conditioning control assembly) when set to OFF*1

ON

$00:OFF,$01:ON

Air conditioning amplifier assembly

Fan Speed Increment Control

Function to set the speed to reach the target blower fan speed when AUTO mode is on

Normal

$01:Short,$00:Normal,$02:Long

Air conditioning amplifier assembly

Outside Air Mode Auto Switch Function

Function to automatically change the air inlet to FRESH mode when the ignition switch is off for 60 seconds

ON

$00:OFF,$01:ON

Air conditioning amplifier assembly

Evaporator Control

Function to set the evaporator control to the automatic position (Automatic) to save power or to the coldest position (Manual) to dehumidify the air and to prevent the windows from fogging up

Automatic

$00:Manual,$01:Automatic

Air conditioning amplifier assembly

Set Temperature Shift

Function to perform control with the shifted temperature versus the displayed temperature

Normal

$05:-2C,$06:-1C,$00:Normal,$01:+1C,$02:+2C

Air conditioning amplifier assembly

Refrigerant Shortage Check

Function to cancel the refrigerant shortage check (check performed during normal operation) when set to ON

ON

$00:OFF,$01:ON

Air conditioning amplifier assembly

A/C Auto Switch Mode

Function to turn the A/C on automatically by pressing the AUTO button when the blower is on and the A/C is off

ON

$00:OFF,$01:ON

Air conditioning amplifier assembly

  • *1: Make sure to disable ECO mode control before setting this customize setting to ON.

    How To Proceed With Troubleshooting

    CAUTION / NOTICE / HINT HINT: Use the following procedure to troubleshoot the air conditioning system. *: Use the GTS. PROCEDURE 1. VEHICLE BROUGHT TO WORKSHOP NEXT 2...

    Initialization

    INITIALIZATION SERVO MOTOR INITIALIZATION (a) Press the OFF switch. (b) According to the GTS display, perform servo motor initialization. Body Electrical > Air Conditioner > Utility Tester Display Servomotor Initialization HINT: When initialization is started, the AUTO switch indicator will illuminate and then will turn off when initialization has completed...

    Other information:

    Toyota Yaris XP210 (2020-2024) Owner's Manual: Installation on rear outboard seats


    First, adjust the front seat to allow clearance between the child-restraint system and the front seat. Make sure the seatback is securely latched by pushing it back until it is fully locked. Expand the open seams on the rear of the seat bottom slightly to verify the locations of the LATCH lower anchors...

    Toyota Yaris XP210 (2020-2024) Owner's Manual: Load limiter


    The load limiting system releases belt webbing in a controlled manner to reduce belt force on the occupant’s chest. While the most severe load on a seat belt occurs in frontal collisions, the load limiter has an automatic mechanical function and can activate in any accident mode with sufficient occupant movement...

    Categories

    Refueling

    Before refueling, close all the doors, windows, and the liftgate/trunk lid, and switch the ignition OFF.

    To open the fuel-filler lid, pull the remote fuel-filler lid release.

    Toyota Yaris. Refueling

    To remove the fuel-filler cap, turn it counterclockwise. Attach the removed cap to the inner side of the fuel-filler lid.

    read more

     
    Copyright © 2024 www.toyaris4.com