Toyota Yaris: Cruise Control / Cruise Control Switch

- OFF/CAN switch
- ON switch
- RES/+ switch
- SET/- switch
With cruise control, you can set and automatically maintain any
speed of more than about 16 mph (25 km/h).
WARNING
Do not use the cruise control under the following conditions
Using the cruise control under the following conditions is dangerous
and
could result in loss of vehicle control...
Cruise main indication (white)
The cruise main indication
(white) is displayed in the
instrument cluster when the
cruise control system is activated...
Other information:
PRECAUTION NOTICE: If the auxiliary battery has been discharged and charged or the cable has been disconnected and reconnected to the negative (-) auxiliary battery terminal, perform Steering Sensor Zero Point Calibration. Click here
PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL PRECAUTIONS FOR LANE TRACING ASSIST SYSTEM (a) Precautions for Using the Lane Tracing Assist System (1) The lane tracing assist system provides information to the driver and performs steering assistance according to the road and driving conditions...
SYSTEM DESCRIPTION LOAD OPERATION OUTPUT (a) Load is turned on or off according to the operation signals and switch signals from each ECU. Components Semiconductor Power Integration ECU Power Distribution Box Assembly Operation Signal Communication Support
*1: w/ Front Seat Heater
*2: Built into power distribution box assembly Headlight ECU Assembly ○ - Not supported Fog Light Assembly ○ - Supported Rear Window Defogger / Mirror Heater - ○ Supported Taillight - ○ Supported Rear Fog Light - ○ Supported Back-up Light - ○ Not supported Outer Rear View Mirror Assembly - ○ Supported Panel Illumination - ○ Supported Seat Heater LH*1 High/Low - ○ Not supported Seat Heater RH*1 High/Low - ○ Not supported Passenger Seat Buckle Switch Delegated Input - ○ - Occupant Detection Sensor Delegated Input - ○ - Rear Seat RH Buckle Switch Delegated Input - ○ - Rear Seat CTR Buckle Switch Delegated Input - ○ - Rear Seat LH Buckle Switch Delegated Input - ○ - IGR Relay*2 - ○ Not supported SEMICONDUCTOR FUSE FUNCTION (a) When a malfunction current occurs during load operation, the current is shut off before the electrical lines emit smoke, and then load is turned off...
Categories
Stop the vehicle completely.
Manual transaxle:
Shift into neutral and set the parking brake.
Automatic transaxle:
Shift the selector lever to the P position and set the parking brake.
Press the push button start to turn off the engine. The ignition position is
off.
read more