Toyota Yaris: Headup Display System / Utility

Toyota Yaris XP210 (2020-2026) Reapir and Service Manual / Vehicle Interior / Meter / Gauge / Display / Headup Display System / Utility

UTILITY

MIRROR POSITION INITIALIZATION

HINT:

Use this procedure to return the display of the headup display to its initial position.

(a) Perform the procedure displayed on the GTS.

Body Electrical > Head Up Display > Utility

Tester Display
Mirror Position Reset

Customize Parameters

CUSTOMIZE PARAMETERS NOTICE: When the customer requests a change in a function, first make sure that the function can be customized. Be sure to make a note of the current settings before customizing...

Problem Symptoms Table

PROBLEM SYMPTOMS TABLE NOTICE: When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored...

Other information:

Toyota Yaris XP210 (2020-2026) Reapir and Service Manual: Removal

REMOVAL PROCEDURE 1. REMOVE LOWER STEERING COLUMN COVER Click here 2. REMOVE UPPER STEERING COLUMN COVER Click here 3. REMOVE TURN SIGNAL SWITCH (a) Remove the 2 screws. (b) Turn the steering wheel assembly to the left. (c) Using a screwdriver with its tip wrapped with protective tape, disengage the claw to remove the turn signal switch as shown in the illustration...

Toyota Yaris XP210 (2020-2026) Reapir and Service Manual: Power Source Control System Circuit Short to Battery or Open (B278215)

DESCRIPTION The certification ECU (smart key ECU assembly) has a power source mode switching function. This DTC is stored when the IGE input (the steering lock motor activation permission signal) sent directly from the certification ECU (smart key ECU assembly) to the steering lock ECU (steering lock actuator or upper bracket assembly) is determined to be abnormal...