Toyota Yaris: Automatic Transaxle Controls / Shift Position Indication
The selector position is indicated
when the ignition is switched ON.

Gear position indication
In manual shift mode, the “M” of the shift position indication illuminates and the numeral for the selected gear is displayed.
Various Lockouts:
Indicates that you must depress the brake pedal and hold in
the lock-release button to shift (The ignition must be
switched ON)...
Warning Light
The warning light turns on when the system has a malfunction.
Refer to Warning Lights.
Transaxle Ranges
The shift position indicator light in the combination
meter illuminates...
Other information:
REASSEMBLY PROCEDURE 1. INSTALL GENERATOR DRIVE END FRAME BEARING (a) Using SST and a press, install a new generator drive end frame bearing. SST: 09950-60011 09951-00470 SST: 09950-70010 09951-07100
(b) Fit the tabs of the retainer plate into the cutouts of the generator drive end frame to install the retainer plate...
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the mass air flow meter removal/installation are shown below...
Categories
WARNING
When removing the fuel-filler cap, loosen the cap slightly and wait
for
any hissing to stop, then remove it
Fuel spray is dangerous. Fuel can burn skin and eyes and cause illness
if
ingested. Fuel spray is released when there is pressure in the fuel tank and
the fuel-filler cap is removed too quickly.
read more