Toyota Yaris: Lighting Control / Headlight Leveling (if equipped)

Toyota Yaris XP210 (2020-2024) Owner's Manual / When Driving / Switches and Controls / Lighting Control / Headlight Leveling (if equipped)

The number of passengers and weight of cargo in the luggage compartment change the angle of the headlights.

The angle of the headlights will be automatically adjusted when turning on the headlights.

Flashing the Headlights

OFF FlashingTo flash the headlights, pull the lever fully towards you (the headlight switch does not need to be on). The headlight high-beam indicator light in the combination meter illuminates simultaneously...

Daytime Running Lights

Some countries require moving vehicles to have their lights on (daytime running lights) during the daytime. The daytime running lights turn on automatically when the vehicle starts moving...

Other information:

Toyota Yaris XP210 (2020-2024) Reapir and Service Manual: Left Front Wheel Speed Sensor Supply Voltage Circuit Short to Ground or Open (C14E014,C14E314)

DESCRIPTION Refer to DTC C05001F. Click here DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from C14E014 Left Front Wheel Speed Sensor Supply Voltage Circuit Short to Ground or Open With the +BS terminal voltage 9...

Toyota Yaris XP210 (2020-2024) Reapir and Service Manual: Removal

REMOVAL CAUTION / NOTICE / HINT NOTICE: After replacing the rear disc brake pads, the brake pedal may feel soft due to clearance between the rear disc brake pads and rear disc. Depress the brake pedal several times until the brake pedal feels firm. HINT: Use the same procedure for the RH side and LH side...

Categories

Break-In Period

No special break-in is necessary, but a few precautions in the first 600 miles (1,000 km) may add to the performance, economy, and life of the vehicle.

Do not race the engine. Do not maintain one constant speed, either slow or fast, for a long period of time. Do not drive constantly at full-throttle or high engine rpm for extended periods of time. Avoid unnecessary hard stops. Avoid full-throttle starts.