Toyota Yaris: Warning/Indicator Lights and Warning Sounds / If a Warning Light Turns On or Flashes

Toyota Yaris XP210 (2020-2024) Owner's Manual / If Trouble Arises / Warning/Indicator Lights and Warning Sounds / If a Warning Light Turns On or Flashes

If any warning light turns on/flashes, take appropriate action for each light. There is no problem if the light turns off, however if the light does not turn off or turns on/flashes again, consult your Toyota dealer.

The details for some warnings can be viewed on the center display.

  1. If the warning light is turned on, select the Toyota Yaris. If a Warning Light Turns On or Flashes icon on the home screen to display the applications screen.
  2. Select “Vehicle Status Monitor”.
  3. Select “Warning Guidance” to display the current warnings.
  4. Select the applicable warning to view the warning details.

Warning/Indicator Lights and Warning Sounds

..

Stop Vehicle in Safe Place Immediately

If any of the following warning lights turns on, the system may have a malfunction. Stop the vehicle in a safe place immediately and contact your Toyota dealer...

Other information:

Toyota Yaris XP210 (2020-2024) Reapir and Service Manual: Installation


INSTALLATION PROCEDURE 1. INSTALL TRANSMISSION CONTROL CABLE ASSEMBLY (a) Pass the transmission control cable assembly through the hole to the outside of the vehicle and install the transmission control cable assembly to the vehicle body with the 2 bolts...

Toyota Yaris XP210 (2020-2024) Reapir and Service Manual: Vehicle Control History


VEHICLE CONTROL HISTORY NOTICE: Vehicle control history may be recorded due to the replacement or repair of related parts. CHECK VEHICLE CONTROL HISTORY (FRONT CAMERA SYSTEM) (a) According to the display on the GTS, check the vehicle control history. Chassis > Front Recognition Camera > Utility Tester Display Vehicle Control History (RoB) Vehicle Control History (RoB) Multi-information Display Code Tester Display Description Diagnostic Note Pre-Collision System Malfunction Visit Your Dealer X2000 Yaw Rate Sensor Malfunction The forward recognition camera received a yaw rate sensor malfunction signal from the skid control ECU (brake actuator assembly)...

Categories

Turning the Engine Off

Stop the vehicle completely. Manual transaxle: Shift into neutral and set the parking brake.

Automatic transaxle: Shift the selector lever to the P position and set the parking brake.

Press the push button start to turn off the engine. The ignition position is off.

read more

 
Copyright © 2024 www.toyaris4.com